User's Manual
En 31
■ Unbalanced connection
Depending on the speaker system you want to use, connect the corresponding PRE OUT (RCA)
jacks of the unit to the amplifier with audio pin cables (RCA unbalanced cables).
Y
We recommend using a power amplifier with volume control bypass (or without volume control circuit).
Connecting subwoofers
Connect the subwoofers (with built-in amplifier) to the PRE OUT jacks of the unit.
Select a balanced (XLR) or an unbalanced (RCA) connection depending on the input jacks
available on your subwoofer.
X
• The XLR jacks and RCA jacks output the same signals.
• You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. When using 2 subwoofers,
configure the “Layout (Subwoofer)” setting (p.123) in the “Setup” menu after connecting the power cable to an
AC wall outlet.
■ Balanced connection
Connect the subwoofers (with built-in amplifier) to the SUBWOOFER PREOUT (XLR) 1–2 jacks
of the unit with XLR balanced cables.
Y
Before connecting XLR balanced cables, refer to the instruction manual of your subwoofer and verify that its XLR
jacks are compatible with the pin assignments of the unit (p.29).
HDMI
(1 MOVIE) (5 STB) (6 GAME)
AV 1 AV 2 AV 3 AV 4
(HDCP2.2)
AV 5 AV 6 AV 7
IN
R
E
L
AV 4
R
SURROUND
BACK
R
SURROUND
R
FRONT FRONT
L
CENTER
PRE OUT
O
NT
E
SENCE
1
2
ZONE OUT
ZONE 2 ZONE 3
R
FM
75ȍ
ANTENNA
(
2 RADIO
)
AM
PRE OUT
(REAR)
SUBWOOFER
FRONT
PRESENCE
REAR
PRESENCE
CENTER
FRONT
SURROUND
SURROUND
BACK
(FRONT)
TRIGGER
OUT
1
2
12V 0.1A
MAX. TOTAL
YPRPB
YPRPB
COMPONENT VIDEO
AV 2
(5 STB)
B
AV 1
(1 MOVIE)
A
Power amplifier
Main input (RCA)
Speaker
connections
The unit (rear)
PRE OUT
(RCA) jacks
Caution
To prevent the generation of loud noises or abnormal sounds, make sure you remove the power cable
of the unit and turn off the subwoofer before making connections.
IN OUT
REMOTE
REAR
PRESENCE
FRONT
PRESENCEBACK
SURROUND
SUBW
OOFER
2
(REAR)
1
(FRONT)
SURROUND
E
AR
S
ENCE
RS-232C
A
L L L L
LR
99
SUBWOOFER
2
(REAR)
1
(FRONT)
LR
XLR
XLR
XLR
XLR
The unit (rear)
(Male connector)
(Female connector)
XLR input XLR input
SUBWOOFER PREOUT
(XLR) 1–2 jacks