User Manual
Table Of Contents
- Cover
- Contents
- Introduction
- Controls and Connectors
- Panel Operations
- Basic Operations
- Screen Structure
- Operations that can be Performed from the Panel
- Alert Messages
- HOME Screen
- METER Screen
- SETTING Screen
- UTILITY Screen
- MENU Screen
- SIGNAL PATH Screen
- SIGNAL PATH Block Diagrams
- Recalling library settings (Speaker Processor only)
- Slot Input Router
- Input On/Off
- 4x4 Matrix Mixer
- 8Band Input EQ
- Input Delay
- Oscillator Mix
- X-Over Input Level (Speaker Processor)
- X-Over Polarity (Speaker Processor)
- X-Over (Speaker Processor)
- Output Delay (Speaker Processor)
- 6Band Output EQ (Speaker Processor)
- Output Level (Speaker Processor)
- Mute On/Off (Speaker Processor)
- Limiter (Speaker Processor)
- Output Router
- SCENE Screen
- Initializing the internal memory
- System Connection Examples
- Connecting External Controllers and Analog Devices
- Adjusting the Input/Output Levels
- Appendix
TX6n/5n/4n Reference Manual
34
Panel Operations
■ 8Band Input EQ
This is an eight-band parametric equalizer that boosts or cuts the signal at the specified frequencies. For each channel, you can
make settings for each frequency band (BAND A–H).
■ Input Delay
Here you can specify a delay for the signal.
Parameter name Range Explanation
Type PEQ, L.SHELF 6,
L.SHELF 12,
H SHELF 6,
H SHELF 12, HPF, LPF
Selects the filter type. You cannot select the type for frequency bands
other than the first and last (B–G). (They are fixed at PEQ.) For details
on the filter types, refer to page 38.
Q 63.0–0.10 Specifies the width of each frequency band.
Frequency 20.0 Hz–20.0 kHz Specifies the center frequency of each frequency band.
Gain -18.0–+18.0 dB Specifies the gain for each frequency band.
Bypass ON/OFF Turns bypass on/off for each frequency band.
EQ All Bands ON/OFF Turns the entire eight-band equalizer on/off.
Parameter name Range Explanation
On ON/OFF Turns the delay on/off.
Delay Time 0.00–1,300.00 ms Specifies the delay time.