Manual

En 117
Sound
Information Displays information about the current audio signal. 125
Lipsync
Delay Enable Enables/disables the “Lipsync” adjustment configured in “Auto/Manual Select” in the “Setup” menu. 126
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 126
Adjustment Adjusts the delay between video and audio output manually. 126
DSP Parameter
DSP Level Adjusts the sound field effect level. 126
Initial Delay Adjusts the delay between the direct sound and presence sound field generation. 127
Room Size Adjusts the broadening effect of the presence sound field. 127
Liveness Adjusts the loss of the presence sound field. 127
Reverb Time Adjusts the decay time of the rear reverberant sound. 127
Reverb Delay Adjusts the delay between the direct sound and reverberant sound generation. 127
Reverb Level Adjusts the volume of the reverberant sound. 127
Surround Initial Delay Adjusts the delay between the direct sound and surround sound field generation. 127
Surround Room Size Adjusts the broadening effect of the surround sound field. 128
Surround Liveness Adjusts the loss of the surround sound field. 128
Surround Back Initial Delay Adjusts the delay between the direct sound and surround back sound field generation. 128
Surround Back Room Size Adjusts the broadening effect of the surround back sound field. 128
Surround Back Liveness Adjusts the loss of the surround back sound field. 128
Surround Decoder
Decode Type Selects a surround decoder to be used in combination with the selected sound program. 128
Center Spread Selects whether to spread the center channel signals to left and right when 2-channel source is played. 128
Center Image Adjusts the center localization (broadening effect) of the front sound field. 128
11ch Stereo
Level Adjusts the entire volume. 129
Front / Rear Balance Adjusts the front and rear volume balance. 129
Left / Right Balance Adjusts the left and right volume balance. 129
Height Balance Adjusts the height volume balance using the presence speakers. 129
Monaural Mix Enables/disables monaural sound output. 129
Reset Restores all default settings. 129
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 129
Volume
Max Volume Sets the limit value of the volume. 130
Initial Volume Sets the initial volume for when this receiver is turned on. 130
Pure Direct Mode Selects whether to output video signals during the Pure Direct mode. 130
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP 3D effect level when the volume is adjusted. 130
Virtual Speaker
VPS Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround speakers. 130
VSBS Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. 130
Ultra Low Jitter PLL Mode Enables/disables the jitter elimination function. 131
DAC Digital Filter Selects the digital filter type of the audio DAC (digital-to-analog converter). 131
Balance Input Attenuator Selects whether to activate the attenuator for the balance input to avoid sound distortion. 131
Menu Item Function Page