User Manual

TA3 TC3 SH3 SC3 Owner’s Manual
14
1 Preparing the Power Supply
In order to use the special functions on the TransAcoustic™ Piano or the Silent Piano™, the power to the instrument must
be turned on. If you are using the instrument as a conventional acoustic piano, it is not necessary to turn on the power.
1
Connect the plugs of the AC adaptor and power cord.
The connection method differs depending on the instrument.
WARNING
• Use the specified adaptor (page 76) only. Using the wrong AC adaptor can result in damage to the instrument or
overheating.
• When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or
malfunction occurs, immediately turn the power off and disconnect the plug from the outlet.
NOTE
When disconnecting the power cord/AC adaptor, first turn off the power, and then follow this procedure in reverse order.
• For upright pianos:
Connect the plugs to the DC IN jack (DC IN 24V or DC IN 16V) located at the rear of the piano, and to the AC
outlet in the order shown in the illustration. Use the provided hooks to hold and organize any excess cord.
* Depending on the specific model, the connection method may differ.
TA3 TC3 SH3 SC3
1-2
1-1
1-3
Hook
AC outlet
AC plug
Power cord
AC
adaptor
DC IN jack
(DC IN 24V or
DC IN 16V)
The shape of the plug and outlet may differ depending on your locale.
For pianos having the DC IN jack located at the rear:
1-2
1-1
1-3
AC outlet
AC plug
Power cord
AC
adaptor
Control unit
Hook
For pianos NOT having the DC IN jack located at the rear:
The shape of the plug and outlet may differ depending on your locale.