User Manual

TA3 TC3 SH3 SC3 Owner’s Manual
50
 Song settings
 Metronome/Rhythm settings
Function
No.
Description Setting
range
Default
setting
f%1
MIDI Song/
Keyboard Volume
Balance
Adjusts the volume balance between the keyboard
performance and MIDI Song playback. The higher the
value, the lower the Song playback volume becomes;
the lower the value, the lower the keyboard
performance volume becomes. To adjust the balance
with Audio Song, adjust the Audio Song volume in
F5.3.
NOTE
Some PianoSoft Songs have their own volume balance
settings. These settings take priority to the balance setting
here.
−64–0–+64 0
f%2
Song Transpose Shifts the pitch of the MIDI Song or Audio Song up or
down in semitone intervals. For example, if you set this
parameter to “5,” the pitch of key C is played back as F.
In this way, an F major song is played back as if it were
in C major.
NOTE
• MIDI note numbers received from an external MIDI device or
computer will not be affected by the transpose setting here.
• Applying transpose to an Audio Song may change its tonal
characteristics.
−12–0–+12 0
f%3
Audio Song
Volume
Adjusts the volume of Audio Song playback.
1–20 16
f%4
Copying User
Songs
Copies the User Songs saved in the internal memory
to the connected USB flash drive. For details, refer to
page 34.
— —
f%5
Deleting User
Songs
Deletes the User Songs in the internal memory or the
connected USB flash drive. For details, refer to
page 35.
— —
f%6
Formatting a USB
flash drive
Formats or initializes the USB flash drive. For details,
refer to page 56.
NOTICE
Executing the Format operation will delete all data saved
in the USB flash drive. Save important data to a computer
or another storage device.
— —
Function
No.
Description Setting
range
Default
setting
f&1
Metronome/
Rhythm Volume
Adjusts the volume of both the metronome and
Rhythm.
1–20 15
f&2
Rhythm Intro Determines whether the Intro is played back (On) or
not (OFF) before the Rhythm pattern is started.
NOTE
During Song playback, the Intro cannot be played back even if
you start the Rhythm with this parameter set to “On.”
On/OFF On
f&3
Rhythm Ending Determines whether the Ending is played back (On) or
not (OFF) before the Rhythm pattern is stopped.
On/OFF On