User Manual
Table Of Contents
- Copyright
- About Audinate
- Introduction
- Installing Dante Controller
- Dante Basics
- Discovery and auto-configuration
- Device Channels
- Differentiating between input and output channels
- Device Names and Channel Labels
- Routing Audio
- Clock Synchronization
- Latency
- Device Lock
- Dante Control and Monitoring
- Starting Dante Controller
- Using Dante Controller
- Network View
- Status Bar
- Network View Tabs
- Channel Groups
- Clock Status Monitoring
- Clock Status Monitor
- Automatic Notification of Device Errors
- Device View
- Device View Tabs
- Multicast Transmit Flow Configuration
- Using Dante Controller with Dante Domain Manager
- Presets
- Troubleshooting
- Fanout
- Messages on Startup
- Computer Configuration Checklist
- Troubleshooting Dante IP Address Configuration
- Troubleshooting Switch Configuration and Cabling
- Index
Dante Controller User Guide
Copyright © 2018 Audinate Pty Ltd. All rights reserved.
-96-
n If a perfect match or a device name match cannot be made, the role will be assigned automatically to
a device of the same manufacturer and model, assuming there is an unassigned device of that type
Removing Assignments
To remove an assignment, select the target device and click Clear or press the Delete key on your
keyboard.
Manual Assignments
To manually apply a role to a device:
n Drag the role onto the device, or:
n Select the role in the 'Preset Roles' column and the target device/s in the 'Target Devices' column,
and click Apply.
The LEDicons against each role indicate the assignment status of the role.
A grey icon indicates that the role has not been assigned to any target devices.
A green icon indicates that the role has been successfully assigned to one or more target devices.
An amber icon indicates that the role has been assigned to one or more target devices, but there is a
warning condition associated with one or more of the assignments.
A red icon indicates that the role has been assigned to one or more target devices, but there is an error
condition associated with one or more of the assignments.
A black icon indicates that the role has been assigned to a target device, but the assignment will have a
potentially terminal effect on the operation of the network. A preset cannot be applied if any terminal issues
are identified.
Target Devices
The Target Devices column lists the device names of devices on the currently connected Dante network,
and the roles that have been assigned to them (if applicable).
The LEDicons against each device indicate the assignment status of the device.
A grey icon indicates that the device has not been assigned a role.
A green icon indicates that the device has been successfully assigned a role.