User Manual
Table Of Contents
- System Requirements
- Installation
- Installing Speaker Data
- Uninstalling
- Table of Contents
- 1. Y-S3 General Operation
- 2. Constructing the Room Shape & Audience Area
- 3. Editing Project Properties
- 4. Placing Speakers
- 5. Adjusting Speaker Parameters
- 5-1. Speaker Arrays
- 5-2. Distributed Speakers
- 6. Displaying Calculation Results
- 7. Simulation Results Report
- 8. Exporting Configurations in DME Designer Format
- 9. Other Functions
- 10. General Theory
Yamaha Sound System Simulator Y-S
3
Owner’s Manual V3.1
45
Properties of individual speakers installed on a plane
Speaker Type
Displays the type of speaker installed.
Amplifier - Speaker Combination
Click to open the Amplifier - Speaker Combination window. For details please see the next section in this chapter,
“Output Configuration Settings (Speaker Property - Config)”.
Speakers Geometry
Enter data related to speaker positioning, such as speaker coordinates.
Position
Adjust the coordinates of the speaker array. See chapter 4 for details.
Angle
Enter the angle at which the speaker is installed. See chapter 4 for details.
You can select “Link All” to link all selected speakers with all speakers on the installation plane, and change the
installation angle of all speakers simultaneously. This function is not available in Aspect View when moving target
points with the mouse and changing angles
Absolute/Relative
Click the [Absolute] button to display absolute coordinates, or the [Relative] button to display coordinates relative
to the installation plane.
Absolute:
The absolute location and angle of the speaker
Relative:
The location and angle of the speaker relative to the installation plane