Operation Manual

Enhancing the Disklavier by Hooking Up Other Devices
English
10
Chapter
111
The Disklavier can transmit the information of piano playing/ensemble part
playback on the Disklavier as the MIDI data to the connected MIDI device
to reproduce the sound with its sound generator, etc. or to record the MIDI
data. The following options should be set up in advance.
MIDI OUT Port
Selects the terminal/port used for the data transmission.
MIDI: Select this when the MIDI device is connected to MIDI OUT
terminal.
USB: Select this when the MIDI device is connected to USB port.
MIDI OUT
Selects one of the following parts to be transmitted to the connected MIDI
device.
ESBL Out:Select this when you transmit the ensemble part played back
on the Disklavier.
KBD Out: Select this when you transmit the piano part played on the
Disklavier.
Press [SETUP] on the remote control.
The setup menu screen appears.
Select “MIDI” with the cursor buttons ([ ] [ ] [ ] [ ]),
then press [ENTER].
The MIDI setting screen appears.
Setting the Disklavier for MIDI Data Transmission
[SETUP] “MIDI”
1
*TimerPlay
*MIDI
*AudioI/O
*M-Tune
=SETUP MENU=
(1/3)

2
*TimerPlay
*MIDI
*AudioI/O
*M-Tune
=SETUP MENU=
(1/3)
