Operation Manual
MIDI Data Format
A-24
For parameters with data size of 2 or 4, transmit the appropriate
number of data bytes.
When sending the parameter change messages consecutively, be
sure to leave an appropriate interval (if the time base is 480. ca 5
unit) between the messages.
2.1.4.1 XG System On
(ESBL Part)
11110000 F0 Exclusive status
01000011 43 YAMAHA ID
0001nnnn 1N Device Number
01001100 4C XG Model ID
0aaaaaaa 00 Address High
0aaaaaaa 00 Address Mid
0aaaaaaa 7E Address Low
00000000 00 Data
11110111 F7 End of Exclusive
When this data is received. the Disklavier will switch to XG
mode and all the parameters will be initialized accordingly, and
XG-compatible messages such as NRPN and Bank Select
messages can be received.
Since approximately 50ms is required to execute this message, be
sure to leave an appropriate interval before the subsequent
message
2.1.4.2 XG System Data parameter change
(ESBL Part)
See tables <1-1> and <1-2>.
2.1.4.3 Multi Effect1 Data parameter change
(ESBL Part)
See tables <1-1> and <1-3>.
2.1.4.4 Multi Part Data parameter change
(ESBL Part)
See tables <1-1> and <1-4>.
2.1.4.5 Drums Setup Data parameter change
(ESBL Part)
See tables <1-1> and <1-5>.
If a Drum Setup Reset parameter change message is received, the
Drum Setup parameter values will be initialized.
Selecting a Drum Set will cause the Drum Setup parameter
values to be initialized.
2.1.5 Other parameter changes
2.1.5.1 Master Tuning
(ESBL Part)
11110000 F0 Exclusive status
01000011 43 YAMAHA ID
0001nnnn 1n Device Number
00100111 27 Model ID
00110000 30 Sub ID2
00000000 00
00000000 00
0mmmmmmm mm Master Tune MSB
0lllllll ll Master Tune LSB
0ccccccc cc
11110111 F7 End of Exclusive
This message simultaneously changes the pitch of all channels.
2.2 Bulk Dump
(ESBL Part)
The Disklavier receives the following bulk dump data.
[XG NATIVE]
1) XG System Data
2) Multi Effect1 Data
3) Multi Part Data
4) Drums Setup Data
[QS300 NATIVE]
1) QS300 User Normal Voice Data
2.2.1 XG Native Bulk Dump
11110000 F0 Exclusive status
01000011 43 YAMAHA ID
0000nnnn 0n Device Number
01001100 4C XG Model ID
0bbbbbbb bbbbbbb ByteCount
0bbbbbbb bbbbbbb ByteCount
0aaaaaaa aaaaaaa Address High
0aaaaaaa aaaaaaa Address Mid
0aaaaaaa aaaaaaa Address Low
0ddddddd dd Data
||
||
0ccccccc ccccccc Checksum
11110111 F7 End of Exclusive
For the Address and Byte Count, refer to the supplementary
tables.
The Checksum is the value that results in a value of 0 for the
lower 7 bits when the Start Address, Byte Count, plus the
Checksum itself are added.
2.2.1.1 XG System Data bulk dump
(ESBL Part)
See tables <1-1> and <1-2>.
2.2.1.2 Multi Effect1 Data bulk dump
(ESBL Part)
See tables <1-1> and <1-3>.
2.2.1.3 Multi Part Data bulk dump
(ESBL Part)
See tables <1-1> and <1-4>.
2.2.1.4 Drums Setup Data bulk dump
(ESBL Part)
See tables <1-1> and <1-5>.
2.2.2 QS300 Native Bulk Dump
11110000 F0 Exclusive status
01000011 43 YAMAHA ID
0000nnnn 0n Device Number
01001101 4B QS300 Model ID
0bbbbbbb bbbbbbb ByteCount
0bbbbbbb bbbbbbb ByteCount
0aaaaaaa aaaaaaa Address High
0aaaaaaa aaaaaaa Address Mid
0aaaaaaa aaaaaaa Address Low
0ddddddd dd Data
||
||
0ccccccc ccccccc Checksum
11110111 F7 End of Exclusive
2.2.2.1 QS300 User Normal Voice Data bulk damp
(ESBL Part)
See tables <2-1> and <2-2>.