Owner`s manual

Setting the MIDI Note Number

Using the MIDI/Utility Mode

After entering the MIDI/Utility mode, press the [KIT ASSIGN]

button, the MIDI note number currently assigned to Pad 1 will appear in

the display.

1 Display the MIDI Note Number

BEAT

ASSIGN

PAD KIT

Select the pad to be assigned a MIDI Note Number

Strike any pad to see the currently assigned MIDI note number in the

display.

Sharp notes are indicated by a dot on the upper left side of the display,

minus values are indicated by a dot on the upper right side of the display.

BEAT

—(Minus)

# (Sharp)

3 Assign a MIDI Note Number

To select the desired MIDI note number, turn the DIAL to the right

(clockwise) and the MIDI note numbers will increase. Turn the DIAL to

the left (counter-clockwise) and MIDI note numbers will decrease.

• You can also select the MIDI note number by striking the pad. Every time the pad

is struck, the value will increase by one.

4 Exit the MIDI/Utility mode

After each pad is assigned a MIDI note number, exit the MIDI/Utility

mode.

• For information on transmit notes and voices, refer to the DD-50 “Drum Map”

(note - voice, list) on page 27.

• When the Pad Assign or Kit Assign is set, the MIDI Note Number will be applied

to the preset value. If the Auto Kit Select is set to ON and another Song is

selected, the MIDI Note Number will be applied to the preset value. Auto Kit

Select is automatically turned off when a MIDI Note Number is changed.

Each pad and pedal (9 total) can be assigned a specific MIDI note number anywhere from C-2 to G8.