Specifications

Disk Operations
80
Utility – Delete
This function allows you to delete individual files of User data you’ve saved to
floppy disk.
1 Insert the floppy disk into the disk drive.
2 Press the [UTILITY] button.
The filename will appear at the top of the display.
To exit from the UTILITY screen, press the [UTILITY] button twice.
3 Select the file to be deleted.
Use the [+]/[-] buttons.
4 Press the [EXECUTE] button.
5 Execute the delete operation.
Press the [+] button (“YES”), and the Delete operation will start. Once
started, the operation cannot be canceled.
As the file is deleting, “Deleting” will appear on the top line of the display.
When the operation is completed, the following display briefly appears.
If you do not intend to delete the file, press the [-] button (“NO”) instead of
the [+] button (“YES”).
To exit from the UTILITY screen, press the [UTILITY] button twice.
• If the [UTILITY] button is pressed
when there is no floppy disk
inserted into the disk drive, a “No
disk” message appears at the top
of the display, and all disk opera-
tions will be disabled.
• When the floppy disk’s write-pro-
tect tab is set to ON (see page
74) or the disk is a purposely
“copy-protected” disk, a “Protect”
message appears, indicating that
the Utility function is not possible.
• SMF files are indicated by “d-s”.
This case is user file
Filename
d-U
• Only files that were created on
the DGX-500/300 and were
saved as files (User song, etc.)
can be deleted. When there are
no files on disk that the DGX-
500/300 can delete, the FOR-
MAT display appears instead of
DELETE, when the [UTILITY]
button is pressed.
Filename
d-U
Filename
YES
• While the file is being deleted
(the DISK IN USE lamp is lit),
never eject the floppy disk or
turn the power off.
Deleting
d-U
Complete