Owner's Manual

R
e
f
e
r
e
n
c
e
DGX-620/520, YPG-625/525 Owner’s Manual 97
Connections
q USB TO DEVICE terminal
This terminal allows connection to USB stor-
age devices. Refer to “Connection to a USB
Storage Device” on page 97.
w USB TO HOST terminal
This terminal allows direct connection to a per-
sonal computer. Refer to “Connecting a Per-
sonal Computer” on page 99 for more
information.
By connecting the instrument to a USB storage device with a standard USB cable, you can save data you’ve
created to the connected device, as well as read data from the connected device.
■Compatible USB
storage devices
● ● ● ● ● ● ● ● ● ● ● ● ● ●
A USB storage device, such as a floppy disk drive,
hard disk drive, CD-ROM drive, flash memory,
reader/writer, etc., can be connected to the USB
TO DEVICE terminal. Other USB devices such as
a computer keyboard or mouse cannot be used.
Before purchasing USB storage devices, please
consult your Yamaha dealer, or an authorized
Yamaha distributor (see list at end of the Owner’s
Manual) for advice.
■Connection to
a USB storage device
● ● ● ● ● ● ● ● ●
Connectors
wq
Connection to a USB Storage Device
•Never unplug the USB cable, remove media (such as a floppy
disk) from a USB memory device, or turn off the power immedi-
ately after connecting the USB cable (while is showing on
the display) or while data is being read or written. Doing so can
result in failure of the media and corruption of the data on the
media and/or instrument.
CAUTION
• Some USB memory devices may require more current than the
instrument can supply, causing the instrument’s over-current pro-
tection function to be activated and making it impossible to use
the device. If this occurs “OverCurrent” will appear in the upper
area of the MAIN display. To restore normal operation remove the
USB device from the USB TO DEVICE connector and turn the
instrument’s power off and then back on again.
CAUTION