Setting Up Appendix Reference Basic Guide Owner’s Manual Keyboard Stand Assembly For information on assembling the keyboard stand, refer to the instructions on page 10 of this manual.
SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind.
COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party : Yamaha Corporation of America Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620 Telephone : 714-522-9011 Type of Equipment : Digital Piano Model Name : DGX-650 This device complies with Part 15 of the FCC Rules.
Table of Contents Setting Up Setting Up Special Features ..............................................................5 PRECAUTIONS ...............................................................6 Compatible Format...........................................................8 About Manuals .................................................................9 Included Accessories .......................................................
Setting Up Special Features Natural Piano Voice Page 23 Setting Up The DGX-650 features an amazingly realistic piano Voice (“Natural! Grand Piano”; Voice 001) meticulously sampled from a concert grand piano—fantastic for playing not only classical compositions but also piano pieces in any style. No matter what instrument settings have been made, you can instantly call up the Piano Voice by simply pressing the [PORTABLE GRAND] button.
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. Setting Up WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards.
Connections Handling caution • Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. • Be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. • Do not insert a finger or hand in any gaps on the instrument.
Compatible Format Setting Up GM System Level 1 “GM System Level 1” is an addition to the MIDI standard which ensures that any GM-compatible music data can be accurately played by any GM-compatible tone generator, regardless of manufacturer. The GM mark is affixed to all software and hardware products that support GM System Level. XF The Yamaha XF format enhances the SMF (Standard MIDI File) standard with greater functionality and open-ended expandability for the future.
About Manuals Setting Up This instrument has the following documents and instructional materials. Included Documents Owner’s Manual (this book) • Setting Up Please read this section first. • Basic Guide This section explains how to use the basic functions. Refer to this section while playing the instrument. • Reference This section explains how to make detailed settings for the various functions of the instrument. • Appendix This section includes troubleshooting information and specifications.
Keyboard Stand Assembly CAUTION Setting Up Read these cautions carefully before you assemble or use the keyboard stand. These cautions are to promote safe use of the stand and to prevent injury and damage from occurring to you and others. By following these cautions carefully, your keyboard stand will provide you with safe and prolonged use. • Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the sequence given below.
Keyboard Stand Assembly 2 w Metal bracket w Metal bracket w Metal bracket w Metal bracket (A) (B) Setting Up (C) (C) e 3 x 8 mm e 3 x 8 mm roundhead screws roundhead screws L R 3 q Joint connectors 2 Attach the metal brackets. Attach the metal brackets w to the top of the side boards, using the screws e as shown. 3 Attach the stand bases. Insert the joint connectors q into the side boards as shown.
Keyboard Stand Assembly 4 4 Setting Up t 6 x 30 mm roundhead screws Attach the back board. Attach the back board, using the screws t. Check the back-to-front orientation for the side boards. Make sure the non-colored surface is facing down. CAUTION • Be careful not to drop the back board or touch the sharp metal fittings. NOTE • If you have purchased an optional pedal unit, attach the pedal unit before proceeding to the next step. Refer to the instructions provided with your pedal unit.
Keyboard Stand Assembly 6 Install the keyboard to the stand. Fix the keyboard to the angle brackets, using the screws y. Setting Up 6 y 5 x 16 mm roundhead screws Post-assembly checklist Once you’ve assembled the stand, check the following points: • Are there any parts left over? If so, read the assembly instructions again and correct any errors you might have made. • Is the instrument clear of doors and other movable fixtures? If not, move the instrument to an appropriate location.
Panel Controls and Terminals Front Panel Song category list Style category list Setting Up e r t y q u w i o !0 !3 #2 !1 !2 !4 Front Panel q w e r t y u i o !0 !1 !2 !3 14 [ ] (Standby/On) switch..................... page 19 [MASTER VOLUME] control ................page 20 [DEMO/BGM] button .................... pages 34, 63 [SCORE] button....................................page 37 [LYRICS] button....................................page 37 [REC] button ...........................
Panel Controls and Terminals Voice category list Music Database category list Setting Up Display (page 21) !9 !6 @0 #1 !7 !8 @1 @2 @3 @4 @5 @6 !5 @7 @8 @9 #0 A-1 C0 C1 C2 C3 C4 C5 C6 C7 Rear Panel #3 #4 #5 #6 #7 #8 #9 Rear Panel #3 #4 #5 #6 #7 #8 #9 CONTRAST knob .................................page 21 USB TO HOST terminal................ pages 19, 68 SUSTAIN jack ....................................... page 16 PEDAL UNIT jack .................................
Setting Up Power Requirements Setting Up WARNING • Use the specified adaptor (page 81) only. Using the wrong adaptor can result in damage to the instrument or overheating. 1 Connect the AC power adaptor to the DC IN jack. 2 Plug the AC power adaptor into an AC outlet. 1 CAUTION 2 • Unplug the AC Power Adaptor when not using the instrument, or during electrical storms, to avoid the possibility of physical injury to you or others, or damage to the instrument or other property.
Setting Up Connecting Headphones or External Audio Equipment (PHONES/OUTPUT Jack) Setting Up CAUTION • Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. NOTICE Headphones Any pair of stereo headphones with a standard stereo phone plug can be plugged in here for convenient monitoring.
Setting Up Connecting a Pedal Unit (PEDAL UNIT jack) Setting Up This jack is for connecting an optional LP-7A/LP7AWH pedal unit. When connecting the pedal unit, make sure to also assemble the unit on the supplied keyboard stand. NOTE • Make sure that power is off when connecting or disconnecting the pedal. • This affects only Main/Dual Voices and Harmony sound (pages 23, 24 and 27).
Setting Up Connecting a Computer (USB TO HOST terminal) By connecting a computer to the USB TO HOST terminal, you can transfer data between the instrument and the computer via MIDI. For details on using a computer with this instrument, refer to “Computer-related Operations” on the website (page 9). USB terminal USB TO HOST terminal Instrument USB cable NOTICE • Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used.
Setting Up Setting the Volume Setting Up To adjust the volume level of the entire keyboard sound, use the MASTER VOLUME control located at the left of the panel. Play the keyboard to actually produce sound while you adjusting the volume to the desired level. NOTE • Adjusting the MASTER VOLUME control also affects the output level of the PHONES/OUTPUT jack. CAUTION • Do not use the instrument at a high volume level for a long period of time, or your hearing may be damaged.
MAIN Display Setting Up When the power is turned on, the MAIN display automatically appears. This display shows the basic settings of the instrument, including the current Voice, Style, Song, Audio and other settings. To Return to the MAIN Display You can return to the MAIN display from any other display by pressing the [EXIT] button. CONTRAST knob Adjust the CONTRAST knob on the rear panel of the instrument for optimum display legibility. A-B Repeat Appears when A-B Repeat playback is engaged.
Basic Controls Before operating the instrument, it may be helpful to familiarize yourself with the basic controls below that are used to select items and change values. Setting Up Dial Rotate the dial clockwise to increase the value, or counterclockwise to decrease the value. Decrease Increase CATEGORY buttons Use these buttons to jump to the first Voice, Style, or Song in the next or previous Category, and call up the next or previous Function sequentially.
Try Playing a Variety of Instrument Voices Basic Guide In addition to the wonderfully realistic piano sounds, you can select and play other musical instrument Voices, such as organ, guitar, bass, strings, sax, trumpet, drums and percussion, and even sound effects. Selecting a Main Voice 3 Play the keyboard. This procedure selects the Main Voice for playing on the keyboard. Press the [VOICE] button to call up the Main Voice selection display. The current Voice number and name will be highlighted.
Try Playing a Variety of Instrument Voices Layering Two Voices—Dual Voice In addition to the Main Voice, you can layer a different Voice over the entire keyboard as a “Dual Voice.” 1 Press the [DUAL ON/OFF] button to turn Dual on. Playing a Split Voice in the Left Hand area By dividing the keyboard into two separate areas, you can play one Voice with your right hand and a different Voice with your left. 1 Press the [SPLIT ON/OFF] button to turn on Split.
Try Playing a Variety of Instrument Voices Setting the Time Signature Using the Metronome The instrument features a built-in metronome (a device that keeps an accurate tempo), convenient for practicing. 1 Here, we’ll set a time signature of 3/4 as an example. 1 Press the [METRONOME ON/OFF] button to start the metronome. Hold down the [METRONOME ON/OFF] button for longer than a second to call up “Time Signature - Numerator.” The time signature is shown on the display.
Try Playing a Variety of Instrument Voices 4 Rotate the dial to select “4.” Setting the Bell sound This allows you to select whether the click sound has a bell accent, or plays only a click sound. 5 Confirm the setting by playing the Metronome. Basic Guide 1 Press the [FUNCTION] button. 2 Use the CATEGORY [r] or [f] button repeatedly to select “Bell.” 3 Rotate the dial to turn the bell sound on or off. Setting the Metronome Volume 1 Press the [FUNCTION] button to call up the FUNCTION display.
Try Playing a Variety of Instrument Voices Adding Harmony How to sound each Harmony Type You can add harmony notes to the Main Voice. 1 Harmony type 01 to 10, 13 Press the [HARMONY ON/OFF] button to turn Harmony on. Press the right-hand keys while playing chords in the auto accompaniment range of the keyboard when the Auto Accompaniment is on (page 28). Harmony type 15 to 18 (Echo) Play the keys. Basic Guide Harmony type 19 to 22 (Tremolo) Keep holding down the keys.
Playing Styles The instrument features a variety of accompaniment and rhythmic backing patterns (called “Styles”) in a variety of different musical genres including pop, jazz, and many others. Each Style features Auto Accompaniment, letting you produce automatic accompaniment playback simply by playing “chords” with your left hand. This lets you automatically recreate the sound of a full band or orchestra — even if you’re playing by yourself.
Playing Styles 5 Press the [SYNC START] button to turn Synchro Start on. You can add intro, ending and rhythm variations to Style playback by using “Sections.” For details, refer to page 58. Flashes when Synchro Start is on. Using the Music Database Play a chord in the Auto Accompaniment range to start Style playback. Play a melody with your right hand and chords with your left. 1 Press the [MUSIC DATABASE] button to call up the Music Database selection display.
Playing Styles Chords For users who are unfamiliar with chords, this chart shows the notes of common chords. Since there are many useful chords and many different ways to use them musically, refer to commercially available chord books for further details. indicates the root note.
Playing Styles Using the Smart Chord feature If you want to fully enjoy playing in various Styles but don’t know how to play the appropriate chords, Smart Chord is very useful. This function lets you control Styles with just a single finger as long as you know the key of your playing music, even if you don’t know any chord fingering such as major, minor, diminished and so on.
Playing Styles TYPE Page: This page provides five Types of music genres which determine the specific chord assignment for each scale note in the Auto Accompaniment range. Although selecting a Style in step 1 will automatically set the optimum Type, you can select a different Type here for more appropriate results, if necessary. To do so, from the SMART CHORD display press the CATEGORY [f] button to select the TYPE page then use the dial to select a Type.
Playing Styles Calling up Optimum Styles for Your Performance (Style Recommender) Example 2: Play the following rhythm in the Drum section of the keyboard. Snare This convenient function “recommends” optimum Styles for your performance, based on the rhythm you play for one or two measures. 8-beat Styles or those of a similar feel may be listed on the display. Press the [STYLE RECOMMENDER] button to call up the STYLE RECOMMENDER display.
Playing Songs and Audio Files There are two kinds of data that can be recorded and played back on this instrument: Songs and Audio files. Not only can you play back a Song or Audio file and listen to it, but you can also play the keyboard along with Song or Audio file playback. • Songs The Songs are organized by category as listed below, allowing you to easily select from the desired category. The numbers 001–100 are Preset Songs, and a complete list is provided in the separate Data List.
Playing Songs and Audio Files Playing Back a Song or Audio File SONG SELECT display AUDIO SONG Before using a USB flash memory, be sure to read “Connecting a USB Flash Memory” on page 71. 1 If you want to play back a Song or Audio file on a USB flash memory, connect a USB flash memory to the USB TO DEVICE terminal. Audio files must be on a USB flash memory.
Playing Songs and Audio Files Fast Forward, Rewind, and Pause 3 When playback reaches to the point you want to specify as the end point, press the [A-B REPEAT] button again to set the B point. The specified A-B section of the Song will now play repeatedly. 4 To cancel repeat playback, press the [AB REPEAT] button. To stop playback, press the [START/STOP] button. AUDIO SONG This instrument lets you fast forward [FF], rewind [REW] and pause [PAUSE] playback of the Song or Audio file.
Playing Songs and Audio Files SONG Displaying the Lyrics AUDIO SONG AUDIO You can view the music notation (score) of the selected Song. When the selected Song contains lyric data, you can view it on the instrument’s display during playback. 1 Select a Song (steps 1–3 on page 35). 1 2 Press the [SCORE] button to call up the Score display. Pressing this button each time alternates the displayed notation style between single-staff and double-staff.
Using the Song Lesson Feature You can use the selected Song for a left-hand, right-hand, or both-hands lesson. Try practicing with these three Song Lesson types. Three Types of Song Lesson Lesson 1—Waiting Practicing with Song Lesson 1 In this Lesson, try playing the correct notes shown on the display. The Song pauses until you play the right note. Select the desired Song for your lesson (page 35). NOTE • Audio files cannot be used with the Lesson features.
Using the Song Lesson Feature 4 Press the desired LESSON START button, [WAITING], [YOUR TEMPO] or [MINUS ONE] to start playback of the Song Lesson. Play the notes shown in the on-screen score. The score marker and keyboard marker in the display will indicate the notes to play. 5 When Lesson playback reaches the end, check your evaluation Grade on the display. Your performance will be evaluated in four levels: OK, Good, Very Good, or Excellent.
Recording Your Performance This instrument allows you to record your performance in the following two methods. • Song recording (MIDI recording) With this method, recorded performances are saved to the instrument as a User Song, in SMF (format 0) MIDI file. If you want to re-record a specific section or edit parameters such as Voice, use this method. Also if you want to record your performance to each track one by one, execute “Recording to a Specified Track” of the Song recording method.
Recording Your Performance NOTE • You can use the Metronome while recording although the metronome sound will not be recorded. After pressing the [REC] button, set the Time Signature and start Metronome before going on to step 4. 4 6 Press the [+] (YES) button to save the Song. The Song will be stored as a MIDI file to Song number 101–105. To cancel saving, press the [-] (NO) button at the prompt. Play the keyboard to start recording. You can also start recording by pressing the [START/STOP] button.
Recording Your Performance Recording to a Specified Track SONG AUDIO Basic Guide With Song Recording, you can create a Song consisting of six tracks (1–5 and A) by recording your performance to each track one by one. In recording a piano piece, for example, you can record the righthand part to Track 1 then record the left-hand part to Track 2, allowing you create a complete piece which may be difficult to play live with both hands together.
Recording Your Performance Play the keyboard to start Recording. 4 After you finish the performance, press the [START/STOP] button or [REC] button to stop recording. When recording is stopped, a message asking if you want to save the Song appears. or 7 Record your performance to another track by repeating steps 2–6. In step 2, select a track which has no recorded data. Play the keyboard while listening to the already recorded data. You can record to each track [1]–[5] using different Voices.
Recording Your Performance Clearing a User Song SONG Clearing a Specified Track from a User Song AUDIO SONG You can clear all tracks of a User Song. 1 2 Press the [SONG/AUDIO] button, and then select the User Song (101 to 105) to be cleared. Basic Guide While holding down the track [A] button, press the track [1] button for longer than a second. A confirmation message will appear on the display. To cancel this operation, press the [-] (NO) button. Hold for longer than a second.
Recording Your Performance 4 Audio Recording SONG Press the [REC] button to be ready for recording. AUDIO Before recording, make the necessary settings such as Voice/Style selection and the AUX IN connection (if you want to record with the input sound via AUX IN jack). All the sound produced via this instrument other than Metronome can be recorded. If you want to cancel recording, press the [REC] button again or [EXIT] button. NOTICE 1 Connect the USB flash memory to the USB TO DEVICE terminal.
Memorizing Your Favorite Panel Settings This instrument has a Registration Memory feature that lets you memorize your favorite settings for easy recall whenever they’re needed. Up to 32 complete setups can be saved (eight banks of four setups each). 8 Banks Memory 1 Memory 2 Memory 3 Memorizing Panel Settings to the Registration Memory Basic Guide 1 Make the desired settings such as those for Voice and Style. 2 Press and release the [BANK] button to call up a Bank number on the display.
Memorizing Your Favorite Panel Settings Recalling Panel Settings from the Registration Memory 1 Press and release the [BANK] button to call up a Bank number on the display.
Playing Audio Files via an External Audio Player You can output the sound of an external audio device, such as a portable music player, through the built-in speakers of this instrument by connecting it via a cable. This lets you play the keyboard along with playback of your music player. CAUTION • Before connecting, turn off the power of both this instrument and the external audio device. Also, before turning the power on or off, make sure to set all volume levels to minimum (0).
Backup Parameters and Initialization Backup Parameters The following data will be maintained even if the power is turned off and can be transferred then saved to a computer via Musicsoft Downloader as a single Backup file. For instructions, refer to “Computerrelated Operations” (page 9). Initialization This function erases the Backup data described above and Song/Style data, then restores all the default factory settings. As required, execute one of the following two procedures.
Reference Handy Performance Features Selecting a Reverb Type Selecting a Chorus Type The Reverb effect lets you play with a rich concert hall type ambience. Although selecting a Style or Song will call up the optimum Reverb type for the entire sound, you can select a different Reverb type manually. The Chorus effect creates a thick sound that is similar to many of the same Voices being played in unison.
Handy Performance Features Selecting a DSP Type DSP is an abbreviation of Digital Signal Processing. These range from reverb-like ambience effects to distortion and other dynamic processing tools that let you enhance the sound, or completely transform it. The DSP effect can be added to the Main and Dual Voices. Although ON/OFF status and type selection for DSP depends on a selected Main Voice, you can set these parameters manually. 1 3 Use the dial to turn DSP on.
Handy Performance Features Panel Sustain Pitch Controls—Transpose This function adds sustain to the keyboard voices. Use it when you want to add sustain to the voices at all times, regardless of footswitch operation. The sustain function does not affect the Split Voice. The overall pitch of the instrument (except for the Voices with name “*** Kit”) can be shifted up or down by a maximum of 1 octave in semitone increments. 1 Press the [FUNCTION] button. 1 Press the [FUNCTION] button.
Handy Performance Features Pitch Controls—Tuning The overall tuning of the instrument (except for the Voices with name “*** Kit”) can be shifted up or down between 415.3 Hz and 466.2 Hz in approximately 0.2Hz or 0.3Hz increments. The default value is 440.0 Hz. 1 Press the [FUNCTION] button. 2 Use the CATEGORY [+] and [-] buttons to call up “Tuning.” The current setting is displayed.
Handy Performance Features Touch Response Sensitivity The keyboard of this instrument is equipped with a Touch Response feature that lets you dynamically and expressively control the level of the Voices according to your playing strength. 1 Press the [FUNCTION] button. Selecting an EQ Setting for the Best Sound Five different master equalizer (EQ) settings are provided to give you the best possible sound.
Handy Performance Features Setting the Output Gain Level Speaker On/Off Setting Output gain level for the PHONES/OUTPUT jack can be switched between two values suitable for headphones or an external audio equipment. You can set whether the sound of this instrument is always output from its built-in speaker or not when a plug is inserted to the PHONES/OUTPUT jack. 1 Press the [FUNCTION] button. 1 Press the [FUNCTION] button.
Handy Performance Features Intelligent Acoustic Control (IAC) IAC is a function which automatically adjusts and controls the sound quality according to the overall volume of the instrument. Even when the volume is low, it permits both low sounds and high sounds to be clearly heard. IAC is effective only from the sound output of the instrument speakers. Although the default settings of IAC is set to ON, you can turn the function on or off. In addition, you can set the depth of IAC.
Voice Settings Selecting a Dual Voice Voice Editing 1 For each of the Main, Dual and Split Voices, you can edit the parameters such as volume, octave and depth of the Reverb and Chorus, allowing you to create new, custom sounds that best suit your musical needs. Hold down the [DUAL ON/OFF] button for longer than a second to call up the “VOICE SELECT (DUAL)” display. 1 Press the [FUNCTION] button. 2 Use the CATEGORY [r] or [f] buttons to call up the desired item.
Style (Auto Accompaniment) Functions Style Variations—Sections Each Style consists of “Sections” that allow you to vary the arrangement of the accompaniment to match the performance you are playing. Intro Ending Main Fill-in Intro This is used for the beginning of the performance. When the Intro finishes, Style playback shifts to the Main section. The length of the Intro (in measures) differs depending on the selected Style. Main This is used for playing the main part of the performance.
Style (Auto Accompaniment) Functions Press the [MAIN/AUTO FILL] button to select Main A or Main B. 9 Current Section 6 Press the [INTRO/ENDING/rit.] button. Now, you’re ready to start Style playback from the Intro section. 7 Play a chord with your left hand to start playback of the Intro. For this example, play a C major chord (as shown below). For information on how to enter chords, see “Chords” on page 30. Press the [INTRO/ENDING/rit.] button. The Section switches to the Ending.
Style (Auto Accompaniment) Functions Changing the Tempo Adjusting the Volume of the Style A Style can be played at any tempo you desire—fast or slow. You can adjust the volume balance between Style playback and keyboard performance. 1 1 Press the [FUNCTION] button. 2 Use the CATEGORY [r] and [f] buttons to call up “Style Volume.” Press the [TEMPO/TAP] button to call up the Tempo display. Current Tempo value 2 Style Volume Rotate the dial to set a tempo.
Style (Auto Accompaniment) Functions Setting the Split Point Setting the Chord Fingering The point on the keyboard that separates the left-hand range and the right-hand range of the keyboard is called the “Split Point.” When a Style is selected and ACMP is on, the notes played to the left of the Split Point are used to specify the chord for Style playback. When the Split function is on, the notes played to the left of the Split Point are used to play the Split Voice.
Style (Auto Accompaniment) Functions Looking Up Chords Using the Chord Dictionary The Dictionary function is useful when you know the name of a certain chord and want to quickly learn how to play it. Playing range Chord Type range 1 Press and hold the [MINUS ONE] button for longer than a second to call up the DICTIONARY display. 2 As an example, learn how to play a GM7 (G major seventh) chord.
Song and Audio Settings Background Music (BGM) Playback With the default setting, pressing the [DEMO/BGM] button will play back only Overview Demo Song repeatedly. This setting can be changed so that, for example, all internal Songs are played, or all Songs and Audio files on a USB flash memory are played back, letting you use the instrument as a background music source. Five playback group settings are provided. Simply select the one that suits your needs.
Song and Audio Settings Tempo Setting of the Song This operation is same as that of the Style. Refer to page 60. Tap Start This operation is same as that of the Style. Refer to page 60. Song Volume Audio Volume NOTE • Audio volume can be adjusted while an Audio file is selected. 1 Press the [FUNCTION] button. 2 Press the CATEGORY [r] or [f] buttons several times to call up “Audio Volume.” NOTE • Song volume can be adjusted while a Song is selected. 1 Press the [FUNCTION] button.
Song and Audio Settings You can change the Voice of Track 1 or 2 in the current Preset Song temporarily to any other desired Voice. 1 Press the [SONG/AUDIO] button, select the desired Preset Song, then start playback. 2 Hold down the [VOICE] button for longer than a second to call up the “VOICE SELECT (MELODY R)” display for selecting a Voice. Pressing the [VOICE] button alternates the display between VOICE SELECT (MELODY R) and VOICE SELECT (MELODY L), then select the desired display.
The Functions The “Functions” provide access to a range of detailed instrument parameters such as Tuning, Split Point, Voices and Effects. Take a look at the Function List (pages 67–69). When you find the desired Function you want to change, follow the instructions below. 1 Find the desired item in the Function List on pages 67–69. 2 Press the [FUNCTION] button to call up the FUNCTION display.
The Functions Function List Volume Function Range/Settings Default Value Style Volume 000–127 100 Refer to page 60. Song Volume 000–127 100 Refer to page 64. Audio Volume 000–127 100 Determines the volume of the Audio file. AUX IN Level 000–127 100 Determines the volume of the sound input via the AUX IN jack. Transpose -12–+12 00 Refer to page 52. 415.3Hz–466.2Hz 440.0Hz Refer to page 53. 01–12 02 021 (A-1)–108 (C7) 054 (F#2) Refer to page 61.
The Functions Category Function Range/Settings Default Value Reverb Type 01–36 ** Refer to page 50. Chorus Type 01–45 ** Refer to page 50. DSP ON/OFF * Refer to page 51. DSP Type 001–239 * Refer to page 51. Damper Resonance ON/OFF ON This effect is applied only to Voice 001 (Main Voice) or Voice 001 used in Track 1 of the Song. Refer to pages 16 and 18. Sustain ON/OFF OFF Refer to page 52.
The Functions Category Score Function Range/Settings Default Value Description Quantize 1 (1/4 note)/ 2 (1/4 note triplet)/ 3 (1/8 note)/ 4 (1/8 note triplet)/ 5 (1/16 note)/ 6 (1/16 note triplet)/ 7 (1/32 note)/ 8 (1/32 note triplet) – Depending on the Song data, you can make the score more readable by adjusting the timing of the notes. This determines the minimum timing resolution used in the Song.
USB Flash Memory Operations By connecting the USB flash memory device to the USB TO DEVICE terminal, you can save the data created on this instrument, such as User Song and parameter settings. The saved data can be recalled to this instrument again for future use. Precautions when using the USB TO DEVICE terminal This instrument features a built-in USB TO DEVICE terminal. When connecting a USB device to the terminal, be sure to handle the USB device with care. Follow the important precautions below.
USB Flash Memory Operations 1 Connect a USB flash memory to the USB TO DEVICE terminal, being careful to insert it with the proper orientation. A message (information or confirmation dialog) sometimes appears on the display to facilitate operation. Refer to the “Messages” on page 79 for an explanation of each message. 2 Wait for confirmation that the USB flash memory has been properly mounted.
USB Flash Memory Operations Formatting a USB Flash Memory The Format operation lets you prepare commercially available USB flash memory for use with this instrument. NOTICE • If a USB flash memory that contains data is formatted as described below, the data will be erased. Make sure that a USB flash memory to be formatted contains no important data before carrying out the formatting procedure. Reference 1 Press the [FILE CONTROL] button to call up the FILE CONTROL display.
USB Flash Memory Operations Saving a Registration Memory to USB Flash Memory 1 Press the [FILE CONTROL] button to call up the FILE CONTROL display. 2 Use the CATEGORY [r] or [f] buttons to call up “Regist Save.” A default file name will automatically be created. 4 Change the file name as necessary. The [-] button moves the cursor to the left, and the [0] button moves it to the right. Use the dial to select a character for the current cursor location.
USB Flash Memory Operations Saving a User Song to USB Flash Memory This operation saves a User Song (Song numbers 101–105) to USB flash memory. 1 Press the [FILE CONTROL] button to call up the FILE CONTROL display. 2 Use the CATEGORY [r] or [f] buttons to call up “User Song Save.” The SOURCE FILE—a User Song name—will be highlighted. 5 Cursor Reference Use the dial to select the User Song you want to save. 4 Press the [EXECUTE] button.
USB Flash Memory Operations Converting a User Song to an Audio file This operation converts a User Song (Song numbers 101–105) to an Audio file and saves the file to the USB flash memory. NOTE • Only User Songs can be converted to Audio files. 1 Press the [FILE CONTROL] button to call up the FILE CONTROL display. 2 Use the CATEGORY [r] or [f] buttons to call up “Audio Save.” The SOURCE FILE—a User Song name—will be highlighted. 5 Press the [EXECUTE] button. A confirmation message will appear.
USB Flash Memory Operations Loading Files from a USB Flash Memory Registration Memory, Style file and Song file (SMF) residing on a USB flash memory can be loaded into the instrument. 5 NOTICE • If you load a Registration Memory, data will be overwritten by the newly loaded data. Save important data to a USB flash memory before loading data that will overwrite it. 1 NOTICE • The Load operation cannot be cancelled during execution.
Deleting files from a USB Flash Memory Deleting User Data from the Instrument This procedure deletes Registration Memory, Style file, Song file and Audio file from a USB flash memory. This procedure deletes User Song files as well as Style and Song files loaded or transferred from an external device such as a computer. This operation does not erase the Preset data. 1 Press the [FILE CONTROL] button to call up the FILE CONTROL display.
Appendix Troubleshooting For the Instrument Problem Possible Cause and Solution When the instrument is turned on or off, a popping sound is temporarily produced. This is normal and indicates that the instrument is receiving electrical power. The power is automatically turned off. This is normal and due to the Auto Power Off function. If necessary, set the parameter of the Auto Power Off function (page 20). When using a mobile phone, noise is produced.
Messages LCD Message Comment Access error! Indicates the failure in reading or writing from/to the media or the flash memory. Clearing all memory... Displayed while erasing all data in the flash memory. Never turn the power off during data transmission. Data Error! Displayed when the Song or Style contains illegal data. File information area is not large enough. Indicates that saving data in the media cannot be executed since the total number of files have become too many. File is not found.
Specifications Dimensions (W x D x H) Size/Weight Weight Keyboard Other Controllers Control Interface Display Panel Tone Generation Polyphony Voices Preset Number of Keys Type Touch Response Pitch Bend Type Size Color Contrast Score Display Function Lyrics Display Function Language Language Piano Sound Damper Resonance Number of Polyphony (Max.
Specifications Storage Storage and Connectivity Amplifiers and Speakers Power Supply Connectivity Internal Memory External Drives DC IN Headphones/Output Sustain Pedal Pedal Unit USB TO DEVICE USB TO HOST AUX IN (Stereo Mini) Amplifiers Speakers Power Supply Power Consumption Included Accessories Approx. 1.
Index Symbols G [-] and [+] buttons ........................ 22 Grade .............................................39 A H Repeat Playback .......................... 36 Reverb .......................................... 50 Rewind ......................................... 36 Rhythm ......................................... 28 A-B Repeat ................................... 36 Accessories .................................... 9 ACMP ........................................... 28 Assembly ..................
LIMITED 3-YEAR WARRANTY ON DIGITAL PIANOS (P, CP, YDP, DGX640, DGX650) Thank you for selecting a YAMAHA product. YAMAHA products are designed and manufactured to provide a high level of defect-free performance. Yamaha Corporation of America (“YAMAHA”) is proud of the experience and craftsmanship that goes into each and every YAMAHA product.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A.
Yamaha Global Site http://www.yamaha.com/ Yamaha Downloads http://download.yamaha.com/ U.R.G., Digital Musical Instruments Division © 2013 Yamaha Corporation 302POZC*.
