Owner`s manual

DGX-650 Owner’s Manual

Setting Up

Power Requirements

Connect the AC power adaptor to the DC

IN jack.

Plug the AC power adaptor into an AC

outlet.

Connecting a Footswitch (SUSTAIN Jack)

The sustain function lets you produce a natural sustain

as you play by pressing a footswitch. Plug the sup-

plied footswitch into this jack and use it to switch sus-

tain on and off.

Damper Resonance

This function simulates the sustain sound produced

with the damper pedal on a grand piano. If you want

to use this function, select Voice 001 (page 23), then

press the Footswitch. This function can be turned off

via the FUNCTION display (page 68).

• Use the specified adaptor (page 81) only. Using the wrong

adaptor can result in damage to the instrument or over-

heating.

• Unplug the AC Power Adaptor when not using the instru-

ment, or during electrical storms, to avoid the possibility of

physical injury to you or others, or damage to the instru-

ment or other property.

WARNING

CAUTION

AC outlet

AC power

adaptor

• Before connecting the instrument to other electronic components, turn off the power of all the components. Also, before turn-

ing any components on or off, make sure to set all volume levels to minimum (0). Otherwise, damage to the components, electri-

cal shock, or even permanent hearing loss may occur.

CAUTION

• The sustain function does not affect the Split Voice (page 24).

• Make sure that the footswitch plug is properly connected to

the SUSTAIN jack before turning on the power.

• Do not press the footswitch while turning the power on. Doing

this changes the recognized polarity of the footswitch, result-

ing in reversed footswitch operation.

NOTE