User Manual

DGX-670 Owner’s Manual

Basic Operations

This section covers how to enter characters for naming your files/folders, etc. Entering characters is done in

the display shown below.

NOTE

• The following marks cannot be entered for a file/folder name: \ / : * ? " < > |

• File names or folder names can contain up to 50 characters.

1 Change the type of character by pressing the [1U] button.

• CASE: Capital letters, numbers, marks

• case: Lowercase letters, numbers, marks

2 Use the Data dial to move the cursor to the desired position.

3 Press the [2UD] – [6UD] and [7U] buttons, corresponding to the character you

wish to enter.

Several different characters are assigned to each button, and the characters change each time

you press the button. To actually enter the selected character, move the cursor or press another

character-input button. Alternately, you can wait for a short time and the character will be

entered automatically.

For more information on entering characters, refer to “Other character-entry operations” on

the page 32.

NOTE

To cancel the character-entering operation, press the [8D] (Cancel) button.

4 Press the [8U] (OK) button to actually enter the new name and return to the

previous display.

Entering Characters