User Manual

12 DGX-670 Reference Manual

Voices

The Voice Set function allows you to create your own Voices by editing some parameters of the existing

Voices. Once you’ve created a Voice, you can save it as a file to internal memory (User drive) or a USB flash

drive for future recall.

1 Select the desired Voice.

2 In the Voice Selection display, press the [5 ] (Voice Set) button to call up the Voice

Set display.

NOTE If the button is not shown, press the [8] (Close) button to call it up.

3 Use the TAB [E][F] buttons to call up the relevant setting page.

For information on the available parameters in each page, see page 13.

4 As necessary, use the Cursor buttons [][] to select the item (parameter) to be

edited and edit the Voice by using the [1 ]–[7 ] buttons.

Pressing the [8 ] (Compare) button toggles the sound between the edited Voice and original (unedited)

Voice to let you compare the sound played on the keyboard.

5 Press the [8 ] (Save) button to save your edited Voice.

For details on the Save operation, refer to “Basic Operations” in the Owner’s Manual.

NOTICE

The settings will be lost if you select another Voice or turn off the power to the instrument without carrying out the Save operation.

Editing Voices (Voice Set)

Cursor [][]

TAB [E][F]