User Manual

DGX-670 Reference Manual 91

Reset

The items checkmarked on this display can be initialized to the default by pressing one of the [7 ]/

[8 ] buttons. To enter (or remove) checkmarks, use the Cursor buttons [][] to select the item, and

then press the [ENTER] button.

System Setup Resets the System Setup parameters to the original factory settings. Refer to the

Parameter Chart in the Data List on the website for details about which parame-

ters belong to System Setup.

MIDI Setup Resets the MIDI settings including the MIDI Setups on the USER tab display to

the original factory status.

User Effect Resets the current Effect settings and the following data:

• User Microphone Settings ...........................................................page 58

• User Effect types .........................................................................page 70

• User Master EQ types .................................................................page 71

• User Master Compressor types....................................................page 73

Files & Folders Deletes all files and folders saved in the User drive.

Registration Turns off all the REGISTRATION MEMORY [1]–[4] lamps, indicating that no

Registration Memory Bank is selected although all the Registration Memory

Bank files are maintained. In this status, you can create Registration Memory set-

ups from the current panel settings.

NOTE The same operation can be done by turning the power on while holding the B6 key (rightmost B key). In this case,

you can create Registration Memory setups from the default panel settings.

Cursor [][], [ENTER]