Owner’s Manual EN
SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/ or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/AC power adaptor Water warning • Only use the voltage specified as correct for the instrument.
• Before moving the instrument, remove all connected adaptor and other cables. • When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet.
Copyright Notice The following is the title, credits and copyright notices for the song pre-installed in this electronic keyboard: Mona Lisa from the Paramount Picture CAPTAIN CAREY, U.S.A.
Congratulations and thank you for purchasing the Yamaha DGX-230/YPG-235 Portable Grand! Please read this owner’s manual carefully before using the instrument in order to take full advantage of its various features. Make sure to keep this manual in a safe and handy place even after you finish reading, and refer to it often when you need to better understand an operation or function. Included Accessories The DGX-230/YPG-235 package includes the following items. Please check that you have them all.
Special Features of the DGX-230/YPG-235 Graded Soft Touch keyboard Just as on an actual piano, the lower keys are heavy in touch and the higher keys are light, with soft touch of digital keyboard for beginners. ■ Play a Variety of Instrument Voices Page 14 The instrument voice that sounds when you play the keyboard can be changed to violin, flute, harp, or any of an extensive range of voices. You can change the mood of a song written for piano, for example, by using violin to play it instead.
Contents Copyright Notice .................................................................... 6 Panel Logos ........................................................................... 6 Included Accessories ............................................................. 7 Special Features of the DGX-230/YPG-235 .......................... 8 Setting Up 10 Power Requirements ........................................................... 10 Connecting Headphones (PHONES/OUTPUT Jack)...........
Setting Up Be sure to do the following operations BEFORE turning on the power. Power Requirements Although the instrument will run either from an optional AC adaptor or batteries, Yamaha recommends use of an AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not deplete resources. ■ Using an AC Power Adaptor Make sure that the [STANDBY/ON] switch of the instrument is set to STANDBY.
Setting Up Make all necessary connections below BEFORE turning the power on. Connecting Headphones (PHONES/OUTPUT Jack) Connecting to a Computer (USB Terminal) The DGX-230/YPG-235 speakers are automatically shut off when a plug is inserted into this jack. The PHONES/OUTPUT jack also functions as an external output. You can connect the PHONES/OUTPUT jack to a keyboard amplifier, stereo system, mixer, tape recorder, or other line-level audio device to send the instrument’s output signal to that device.
Panel Controls and Terminals Front Panel Style Category List (page 106) Song Category List (page 27) Display (page 52) Music Database List (page 107) e r t q y u i o w GrandPno 001 !0 !1 !2 !3 !4 !5 @9 Front Panel e [P.A.T. ON/OFF] button.................... page 30 r [MUSIC DATABASE] button ............ page 42 t [FUNCTION] button ......................... page 75 y LESSON [L], [R], [START] buttons . page 37 u [METRONOME ON/OFF] button ..... page 56 i [TEMPO/TAP] button .....................
Panel Controls and Terminals Voice Category List (page 100) !6 !7 !8 !9 @3 @0 @1 @5 @6 @7 @8 @2 @4 Rear Panel #0 #1 #2 #3 #4 Rear Panel @2 Number buttons [0]–[9], [+] and [-] buttons.................... pages 51, 75 @3 [DEMO] button ................................. page 26 @4 REGIST MEMORY [MEMORY/BANK], [1], [2] buttons ................................. page 73 #1 USB terminal ............................pages 11, 79 #2 SUSTAIN jack...................................
e d ck Gui ui Q Try Playing a Variety of Instrument Voices Quick Guide In addition to piano, organ, and other “standard” keyboard instruments, this instrument has a large range of voices that includes guitar, bass, strings, sax, trumpet, drums and percussion, sound effects ... a wide variety of musical sounds. Select and Play a Voice—MAIN This procedure selects the main voice you will play on the keyboard. 1 Press the [VOICE] button. The voice number and name will be displayed.
Try Playing a Variety of Instrument Voices Play Two Voices Simultaneously—DUAL You can select a second voice which will play in addition to the main voice when you play the keyboard. The second voice is known as the “dual” voice. 1 Press the [DUAL ON/OFF] button. The [DUAL ON/OFF] button turns the dual voice on or off. When turned on the dual voice icon will appear in the display. The currently selected dual voice will sound in addition to the main voice when you play the keyboard.
Try Playing a Variety of Instrument Voices 4 Play the keyboard. Two voices will sound at the same time. Try selecting and playing a range of dual voices. Play Different Voices with the Left and Right Hands—SPLIT In the split mode you can play different voices to the left and right of the keyboard “split point”. The main and dual voices can be played to the right of the split point, while the voice played to the left of the split point is known as the “split voice”.
Try Playing a Variety of Instrument Voices 3 Select the desired split voice. Watch the displayed split voice and rotate the dial until the voice you want to use is selected. The voice selected here becomes the split voice which will play to the left of the keyboard split point. For this example try selecting the “033 Folk Guitar” voice. Folk Gtr 033 4 Play the keyboard. Try selecting and playing a range of split voices.
Fun Sounds This instrument includes a range of drum kits and unique sound effects you can use for entertainment. Laughter, babbling brooks, jet fly-bys, eerie effects, and much more. These sounds can be a great way to enhance the mood at parties. Drum Kits Drum kits are collections of drum and percussion instruments. When you select a violin or other normal instrument main voice, for example, all keys produce the sound of the same violin, only at different pitches.
e d ck Gui ui Q Playing Styles This instrument has an auto accompaniment feature that produces accompaniment (rhythm + bass + chords) in the style you choose to match chords you play with your left hand. You can select from 160 different styles covering a range of musical genres and time signatures (see page 106 for a complete list of the available styles). In this section we’ll learn how to use the auto accompaniment features. Select a Style Rhythm Most styles includes a rhythm part.
Playing Styles Play Along with a Style You learned how to select a style rhythm on the preceding page. Here we’ll see how to add bass and chord accompaniment to the basic rhythm to produce a full, rich accompaniment that you can play along with. 1 2 Press the [STYLE] button and select the desired style. Turn automatic accompaniment on. Press the [ACMP ON/OFF] button. Pressing this button a second time will turn automatic accompaniment off.
Playing Styles 4 Play a left-hand chord to start the style. You can still “play” chords even if you don’t actually know any chords. This instrument will recognize even a single note as a chord. Try playing from one to three notes at the same time to the left of the split point. The accompaniment will change according to the left-hand notes you play. Try this! Scores for some chord progressions are provided on page 22.
Playing Styles Styles Are More Fun When You Understand Chords Chords, created by playing multiple notes at the same time, are the basis for harmonic accompaniment. In this section we’ll take a look at sequences of different chords played one after another, or “chord sequences”. Since each chord has it’s own unique “color”—even if it’s different fingerings of the same chord—the chords you choose to use in your chord progressions have a huge influence on the overall feel of the music you play.
Playing Styles Recommended Style 148 Piano Boogie —3-chord boogie-woogie— Press the [INTRO/ENDING/rit.] button. C F C G F C Press the [INTRO/ENDING/rit.] button. This progression provides varied harmonic backing with just three chords. When you get a feel for the progression in the score, try changing the order of the chords! Recommended Style 096 Bossa Nova —Bossa nova with jazz-style chords— Press the [INTRO/ENDING/rit.] button.
Playing Styles Playing Auto-accompaniment Chords There are two ways of playing auto-accompaniment chords: ● Easy Chords ● Standard Chords The instrument will automatically recognize the different chord types. This function is called Multi Fingering. Press the [ACMP ON/OFF] button to turn auto-accompaniment on (page 20). The keyboard to the left of the split point (default: 54/F#2) becomes the “accompaniment range”. Play the accompaniment chords in this area of the keyboard.
e d ck Gui ui Q Using Songs With this instrument the term “song” refers the data that makes up a piece of music. You can simply enjoy listening to the 30 internal songs, or use them with just about any of the many functions provided—the performance assistant technology feature, lessons, and more. The songs are organized by category. In this section we’ll learn how to select and play songs, and briefly describe the 30 songs provided.
Using Songs 3 001–030 Built in Songs (see next page) 031–035 User Songs (Songs you record yourself). 036– Songs transferred from a computer (pages 82–84) Listen to the song. Press the [START/STOP] button to begin playback of the selected song. You can stop playback at any time by pressing the [START/STOP] button again. Song start! ● Using the [DEMO] button Press the [DEMO] button to play Songs 001–008 in sequence.
Using Songs ● Song List These 30 songs include songs that effectively demonstrate the instrument’s easy song arranger feature, songs that are ideally suited for use with the performance assistant technology feature, and more. The “Suggested Uses” column provides some ideas as to how the songs can most effectively used. Category Main Demo Voice Demo Function Demo Piano Solo Piano Ensemble Piano Accompaniment CHORD No.
Using Songs Types of Songs The following three types of songs can be used by the DGX-230/YPG-235. ● Preset Songs (the 30 songs built into the instrument) ................Song numbers 001–030. ● User Songs (recordings of your own performances) ..................Song numbers 031–035. ● External song files (song data transferred from a computer*) ...Song numbers 036–. * The Accessory CD-ROM includes a selection of 70 MIDI songs. See page 83 for instructions on how to transfer the songs to the instrument.
e d ck Gui ui Q The Easy Way to Play Piano This instrument includes a performance assistant technology feature that lets you play along with a song and sound like a great pianist (even though you might be making lots of mistakes)! In fact, you can play any notes and still sound good! So even if you can’t play piano and can’t read a note of music, you can have some musical fun. Performance assistant technology offers two selectable types. Select the type that produces the best results for you. ● Chord ..
The Easy Way to Play Piano CHORD Type—Play with Both Hands 1 Press the [P.A.T. ON/OFF] button. This turns on the performance assistant technology feature. The P.A.T. icon will appear when the performance assistant technology feature is on. Nocturne 011 Press the [P.A.T. ON/OFF] button to turn the function on or off. Icon will appear when performance assistant technology is on. 2 Select the CHORD type. CHORD 1 Hold for longer than a second Select Chord Press and hold the [P.A.T.
The Easy Way to Play Piano 4 Press the [START/STOP] button. Song playback will begin. The basic pattern will play repeatedly. Listen to the basic pattern for four measures while getting a feel for the basic pattern, then begin playing yourself from the fifth measure. 5 Play on the keyboard. Before After Try playing the score on the left with both hands. You can even play the same keys over and over: C, E, G, C, E, G, C, E.
The Easy Way to Play Piano CHD/FREE Type—Applying the Chord Type to the Left Hand Only 1 Press the [P.A.T. ON/OFF] button. This turns on the performance assistant technology feature. The P.A.T. icon will appear when the performance assistant technology feature is on. AveMaria 010 Press the [P.A.T. ON/OFF] button to turn the function on or off. Icon will appear when performance assistant technology is on. 2 Select the CHD/FREE type.
The Easy Way to Play Piano 4 Press the [START/STOP] button. Song playback will begin. 5 Play on the keyboard. Play to the right of the split point with your right hand, and to the left of the split point with your left hand. Split point With this type notes played on the left-hand side of the split point will actually sound an octave higher. Play the Nocturne melody with your right hand. Continually play an FA-C arpeggio shown in the illustration with your left hand.
The Easy Way to Play Piano Use the Performance Assistant to Play Like a Pro! Here are a few hints for using the Chord type. If you select Chord/Free, the left-hand section of the keyboard becomes the Chord type section, so use these hints on the lefthand section of the keyboard. To begin, try to feel the rhythm of the song. Then, with your hands spread as shown in the illustration, simply play the keyboard alternately with your left and right hands (any notes will do).
The Easy Way to Play Piano Change the Song Tempo When using the performance assistant technology or in other situations in which the tempo of the song is too fast or too slow for you, you can change the tempo as required. Press the [TEMPO/TAP] button. The tempo display will appear and you can use the dial, the [+] and [-] buttons, or the [0] to [9] number buttons to set to tempo to anywhere from 011 and 280 quarter-note beats per minute.
e d ck Gui ui Q Select a Song For a Lesson Yamaha Education Suite You can select song you like and use it for a left-hand, right-hand, or both-hands lesson. You can also use songs (only SMF format 0) downloaded from the Internet and saved to flash memory. (pages 82–84) During the lesson you can play as slowly as you like, and you can even play wrong notes. Song playback will slow down to a speed you can handle.
Select a Song For a Lesson 2 3 Select the part you want to practice. Press the [R] button for a right-hand lesson, [L] button for a left-hand lesson, or press both the [R] and [L] buttons simultaneously for a bothhands lesson. The currently selected part is shown in the display. Right Right-hand lesson Left Left-hand lesson BothHand Both-hands lesson Start Lesson 1. Press the LESSON [START] button to select Lesson 1.
Select a Song For a Lesson Play the note shown in the display. When you play the correct note, the next note you need play is shown. The song will wait until you play the correct note. Waiting 007 r1 Left-hand part In this case “r1” indicate that right-hand lesson 1 has been selected. Right-hand part (In the case of a right-hand lesson) 4 Stop the Lesson mode. You can stop the Lesson mode at any time by pressing the [START/ STOP] button. Once you’ve mastered Lesson 1, move on to Lesson 2.
Select a Song For a Lesson Lesson 2—Your Tempo Learn to play the correct notes with the correct timing. Song playback tempo will vary to match the speed you are playing at. The song will slow down when you play wrong notes, so you can learn at your own pace. 1 Select the song and part you want to practice (steps 1 and 2 on pages 36, 37). 2 Start Lesson 2. Each time the LESSON [START] button is pressed the lesson modes are selected in sequence: Lesson 1 → Lesson 2 → Lesson 3 → Off → Lesson 1 ...
Select a Song For a Lesson Lesson 3—Minus One Here’s where you can perfect your technique. The song will play at the normal tempo, minus the part you have chosen to play. Play along while listening to the song. 1 Select the song and part you want to practice (steps 1 and 2 on pages 36, 37). 2 Start Lesson 3. Each time the LESSON [START] button is pressed the lesson modes are selected in sequence: Lesson 1 → Lesson 2 → Lesson 3 → Off → Lesson 1 ...
Select a Song For a Lesson Practice Makes Perfect—Repeat and Learn Use this feature when you want to start again just ahead of a section on which you made a mistake, or to repeatedly practice a section you find difficult. Press the [REPEAT & LEARN] button during a lesson. The song location will move back four measures from the point at which you pressed the button, and playback will begin after a one-measure count-in.
e d ck Gui ui Q Play Using the Music Database You want to play music in your favorite style, but you’re not sure how to select the best voice and style for the type of music you want to play ... simply select the appropriate style from the Music Database. The panel settings will automatically be adjusted for the ideal combination of sounds and style! 1 Press the [MUSIC DATABASE] button. Jude Hey 001 A Music Database list will appear in the display. 2 Select a Music Database.
e d ck Gui ui Q Change a Song’s Style In addition to each song’s default style, you can select any other style to play the song with the Easy Song Arranger feature. This means that you can play a song that is normally a ballad, for example, as a bossa nova, as a hip-hop tune, etc. You can create totally different arrangements by changing the style with which a song is played. You can also change the song’s melody voice and the keyboard voice for a complete change of image.
Change a Song’s Style 3 Listen to the song. Press the [START/STOP] button to begin playback of the song. Move on to the next step while the song is playing. Song start! 4 NOTE • When playing song numbers 010, 011 and 020 to 030 while using the Easy Song Arranger, melody tracks will be automatically muted and no melody will sound. In order to hear the melody tracks you will need to press the SONG MEMORY buttons [3] to [5]. Press the [EASY SONG ARRANGER] button.
e d ck Gui ui Q Record Your Own Performance You can record up to 5 of your own performances and save them as user songs 031 through 035. The recorded song can be played back on the instrument. ■ Recordable Data You can record to a total of 6 tracks: 5 melody tracks and 1 style (chord) track. Each track can be recorded individually. ● Melody Track [1]–[5].......... Record the melody parts. ● Style Track [A] ................... Records the chord part.
Record Your Own Performance 2 Select the track(s) you want to record to and confirm your selection on the display. ◆ Record a Melody Track and the Accompaniment Track Together Press the melody track button [1]–[5] you want to record to while holding the [REC] button. Next, press the [A] button while holding the [REC] button. The selected tracks will flash in the display. NOTE • Style accompaniment is automatically turned on when you select the style track [A] for recording.
Record Your Own Performance If you press the [INTRO/ENDING/rit.] button while recording the style track an appropriate ending pattern will play and then recording will stop. When recording stops the current measure number will return to 001 and the recorded track numbers in the display will light. ● To Record Other Tracks Repeat steps 2 through 4 to record any of the remaining tracks.
Record Your Own Performance Song Clear—Deleting User Songs This function clears an entire user song (all tracks). 1 2 NOTE Press the [SONG] button, then select the user song (031– 035) you want to clear. • If you only want to clear a specific track from a user song use the Track Clear function. Press and hold the SONG MEMORY [1] button for longer than a second while holding the SONG MEMORY [A] button. A confirmation message will appear on the display.
Backup and Initialization Backup The following settings are always backed up, and are maintained even when the power is turned off. If you want to initialize the settings, use the Initialize operation as explained below.
Basic Operation and Displays Basic Operation Overall DGX-230/YPG-235 control is based on the following simple operations. 1 Press a button to select a basic function. 2 Use the dial to select an item or value. 3 Start a function. 3 Start a function. 1 Select a basic function. 2 Select an item or value. Display (page 52) GrandPno 001 001 ● Volume Adjustment Adjusts the volume of the sound heard via the instrument’s speakers or a pair of headphones plugged into the PHONES jack.
Basic Operation and Displays 2 Use the dial to select an item or value. When you select a basic function, the item corresponding to that function will be displayed. You can then use the dial or the number buttons [0]–[9] to select the desired item. ForElise 012 This portion of the display indicates the name and number of the currently selected song, voice and style. It also displays the name and current setting/ value of other functions.
Basic Operation and Displays Display Items The display shows all of the current basic settings: song, style, voice. It also includes a range of indicators that show the on/off status of a range of functions. Notation Displays the melody and chord notes of a song when the Song Lesson function is in use, or the notes of chords you specify when the Dictionary function is in use. At other times the notes you play on the keyboard are displayed.
Reference e erenc ef R Adding Effects Harmony This feature adds harmony notes to the main voice. 1 Press the [HARMONY ON/OFF] button to turn Harmony feature on. To turn Harmony off, press the [HARMONY ON/OFF] button again. When harmony is on the harmony icon will appear in the display. 3 Use the dial to select a harmony type. Refer to the Effect Type List on page 109 for information about the available harmony types. Try playing the keyboard with the harmony function.
Adding Effects Adding Reverb Reverb lets you play with a rich concert hall type ambience. When you select a style or song the optimum reverb type for the voice used is automatically selected. If you want to select a different reverb type, use the procedure described below. 1 Press the [FUNCTION] button. 3 Use the dial to select a reverb type. You can check how the selected reverb type sounds by playing on the keyboard.
Adding Effects Adding Chorus The chorus effect creates a thick sound that is similar to many of the same voices being played in unison. When you select a style or song the optimum chorus type for the voice used is automatically selected. If you want to select a different chorus type, use the procedure described below. 1 Press the [FUNCTION] button. 3 Use the dial to select a chorus type. You can check how the selected chorus type sounds by playing on the keyboard.
e erenc ef R Handy Performance Features The Metronome The instrument includes a metronome with adjustable tempo and time signature. Use it to set the tempo that is most comfortable for you. ■Start the metronome ● ● ● ● ● ● ● ● ● ● Turn the metronome on and start it by pressing the [METRONOME ON/OFF] button. To stop the metronome, press the [METRONOME ON/OFF] button again.
Handy Performance Features ■Setting the Number of Beats per Measure, and the Length of Each Beat ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● In this example we’ll set up a 5/8 time signature. ■Adjusting the Metronome Volume ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 1 Press the [FUNCTION] button. 1 Press and hold the [METRONOME ON/ TimesigN 2 Use the CATEGORY [ r ] and [ ] buttons to select the Metronome Volume item.
Handy Performance Features Tap Start You can start the song/style by simply tapping the [TEMPO/TAP] button at the required tempo—4 times for time signatures in 4, and three times for time signatures in 3. You can change the tempo during song playback by pressing the button just twice. Touch Response Sensitivity When touch response is on you can adjust the keyboard’s sensitivity to dynamics in three steps. 1 Press the [FUNCTION] button.
Handy Performance Features Panel Sustain This function adds sustain to the keyboard voices. Use it when you want to add sustain to the voices at all times, regardless of footswitch operation. The sustain function does not affect split voice. 1 Press the [FUNCTION] button. 3 You can then use the [+] and [-] buttons to turn panel sustain on or off. NOTE • The sustain of some voices may not be markedly affected when the panel sustain function is turned on.
Handy Performance Features Pitch Controls ◆ Large Pitch Changes (Transpose) The overall pitch of the instrument can by shifted up or down by a maximum of 1 octave in semitone increments. ◆ Small Pitch Changes (Tuning) The overall tuning of the instrument can by shifted up or down by a maximum of 100 cents in 1-cent increments (100 cents = 1 semitone). 1 Press the [FUNCTION] button. 1 Press the [FUNCTION] button.
Handy Performance Features One Touch Setting Sometimes selecting the ideal voice to play with a song or style can be confusing. The One Touch Setting feature automatically selects a well-balanced voice for you when you select a style or song. Simply select voice number “000” to activate this feature. 1 Select voice number “000” (steps 1 to 2 on page 14). 4 Use the dial to change songs, then play the keyboard and listen to the voice. SweetSpr 000 Use the dial to select voice number 000.
Handy Performance Features Adjusting the Harmony Volume 1 Press the [FUNCTION] button. 2 Use the CATEGORY [ 3 Use the dial to set the harmony volume between 000 and 127. r f ] and [ ] buttons to select the Harmony Volume item.
e erenc ef R Style (Auto-accompaniment) Functions Basic operation of the Style (auto-accompaniment) feature is described on page 19 of the Quick Guide. Here are some other ways you can play the styles, the style volume adjustment procedure, how you can play chords using the styles, and more. Pattern Variation (Sections) The DGX-230/YPG-235 features a wide variety of style “sections” that allow you to vary the arrangement of the accompaniment to match the song you are playing.
Style (Auto-accompaniment) Functions 4 Press the [MAIN/AUTO FILL] button. 8 Press the [INTRO/ENDING/rit.] button. MAIN A The name of the selected section— MAIN A or MAIN B—will be displayed. 5 Press the [INTRO/ENDING/rit.] button. INTRO≥A You’re now ready to play the intro. 6 As soon as you play a chord with your ENDING This switches to the ending section. When the ending is finished, the auto accompaniment stops automatically.
Style (Auto-accompaniment) Functions Adjusting the Style Volume 2 Use the CATEGORY [ r ] and [ ] buttons to select the Style Volume item. f Press the [STYLE] button to engage the style function. 1 Press the [FUNCTION] button. StyleVol 100 3 Use the dial to set the style volume between 000 and 127. Setting the Split Point The initial default split point is key number 54 (the F#2 key), but you can change it to another key using the procedure described below. 1 Press the [FUNCTION] button.
Style (Auto-accompaniment) Functions Play a Style with Chords but No Rhythm (Stop Accompaniment) When auto accompaniment is on (the ACMP ON icon is showing) and Synchro Start is off, you can play chords in the left-hand accompaniment range of the keyboard while the style is stopped and still hear the accompaniment chords. This is “Stop Accompaniment”, and any of the chord fingerings recognized by the instrument can be used (page 24).
Style (Auto-accompaniment) Functions Loading Style Files This instrument features 160 internal styles, but other styles, such as those provided on the CD-ROM and others that can be obtained from the internet (only styles with the “.sty” suffix), can be loaded into style number 161 and used in the same way as the internal styles. In order to use the style file load function, the file must already have been transferred from the computer to the instrument.
Style (Auto-accompaniment) Functions Chord Basics Two or more notes played together constitute a “chord”. The most basic chord type is the “triad” consisting of three notes: the root, third, and fifth degrees of the corresponding scale. A C major triad, for example, is made up of the notes C (the root), E (the third note of the C major scale), and G (the fifth note of the C major scale).
Style (Auto-accompaniment) Functions ■Recognized Standard Chords ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● All chords in the chart are “C-root” chords.
Style (Auto-accompaniment) Functions Looking Up Chords Using the Chord Dictionary The Dictionary function is essentially a built-in “chord book” that shows you the individual notes of chords. It is ideal when you know the name of a certain chord and want to quickly learn how to play it. 1 Press and hold the LESSON [START] button for longer than a second. Hold for longer than a second 3 Press the “M7” (major seventh) key in the section of the keyboard labeled “CHORD TYPE”. (The note doesn’t sound.
e erenc ef R Song Settings Song Volume 1 Press the [FUNCTION] button. 3 Use the dial to set the song volume between 000 and 127. NOTE • Song volume can be adjusted while a song is selected. 2 Use the CATEGORY [ f r ] and [ ] buttons to select the Song Volume item. SongVol 100 Song volume A-B Repeat You can specify a section of a song—“A” is the start point and “B” is the end point—for repeat playback.
Song Settings Muting Independent Song Parts Each “track” of a song plays a different part of the song—melody, percussion, accompaniment, etc. You can mute individual tracks and play the muted part on the keyboard yourself, or simply mute tracks other than the ones you want to listen to. Use the SONG MEMORY [1]–[5] and [A] buttons to mute or un-mute the corresponding tracks. The track number in the display disappears when that track is muted.
e erenc ef R Memorize Your Favorite Panel Settings This instrument has a Registration Memory feature that lets you save your favorite settings for easy recall whenever they’re needed. Up to 16 complete setups can be saved (8 banks of two setups each). 8 Banks Memory 1 Memory 2 Up to 16 presets (eight banks of two each) can be memorized. Saving to the Registration Memory 1 Set the panel controls as required— select a voice, accompaniment style, etc. 2 Press the [MEMORY/BANK] button.
Memorize Your Favorite Panel Settings Recalling a Registration Memory 1 Press the [MEMORY/BANK] button. A bank number will appear in the display when you release the button. ● Settings That Can be Saved to the Registration Memory • Style settings* Style number, Auto Accompaniment ON/OFF, Split Point, Style settings (Main A/B), Style Volume, Tempo, Chord Fingering Bank 1 Bank number 2 Use the dial or the [1]–[8] number buttons to select bank you want to recall.
e erenc ef R The Functions The “Functions” provide access to a range of detailed instrument parameters for tuning, setting the split point, and adjusting the voices and effects. Take a look at the function list starting on the opposite page. There are 47 function parameters in all. When you locate a function you want to set up, simply select the function’s display name (shown to the right of the function name in the list) and adjust as required.
The Functions ● Function Setting List Setting Item title Range/Settings Description Style Volume StyleVol 000–127 Determines the volume of the Style. Song Volume SongVol 000–127 Determines the volume of the Song. Transpose Transpos -12–12 Determines the pitch of the instrument by semitone increments. Tuning Tuning -100–100 Sets the pitch of the instrument’s sound in 1-cent increments. Pitch Bend Range PBRange 01–12 Sets the pitch bend range in semitone increments.
The Functions Setting Item title Range/Settings Description Reverb Type Reverb 01–10 Determines the Reverb type, including off (10). (See the list on page 109) Chorus Type Chorus 01–05 Determines the Chorus type, including off (05). (See the list on page 109) Panel Sustain Sustain ON/OFF Determines whether or not panel sustain is always applied to the MAIN/ DUAL voices. Panel sustain is applied continuously when ON, or not applied when OFF.
e erenc ef R Connecting to a Computer Nearly all of the electronic musical instruments made today—particularly synthesizers, sequencers and computer music related devices—use MIDI. MIDI is a worldwide standard that allows these devices to send and receive performance and setting data. Naturally, this instrument lets you save or send your keyboard performance as MIDI data, as well as the songs, styles and panel settings.
Connecting to a Computer ● Channel Messages This instrument is capable of handling 16 MIDI channels simultaneously—meaning it can play up to sixteen different instruments at the same time. Channel messages transmit information such as Note ON/OFF, Program Change, for each of the 16 channels. Message Name ● System Messages This is data that is used in common by the entire MIDI system.
Connecting to a Computer Transferring Performance Data to and from a Computer By connecting the instrument to a computer, the instrument’s performance data can be used on the computer, and performance data from the computer can be played on the instrument. ● When the instrument is connected with computer, it transmits/receives performance data.
Connecting to a Computer ■PC Mode ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● A number of MIDI settings need to be made when you want to transfer performance data between the computer and the instrument. The PC Mode item can conveniently make multiple settings for you in one operation. Three settings are available: PC1, PC2, and OFF. This setting is not necessary when transferring song or backup files between the computer and the instrument. * Set the PC mode to PC2 when using Digital Music Notebook.
Connecting to a Computer Initial Send This function lets you send the panel setup data to a computer. Before you record performance data to a sequencer application running on your computer, it is a good idea to first send and record the panel setup data before the actual performance data. 1 Press the [FUNCTION] button. 2 Use the CATEGORY [ 3 Press [+/YES] to send, or press [-/NO] to cancel. r f ] and [ ] buttons to select the Initial Send item.
Connecting to a Computer ● Backup files can be transferred from the instrument to a computer and back. ⇒ refer to the procedure described on page 84. q Click the CD-ROM drive Use the Musicsoft Downloader application with Internet Explorer 5.5 or higher. ■Use Musicsoft Downloader To Transfer Songs From the Accessory CD-ROM To the Instrument’s flash memory ● ● ● ● ● NOTE • If a song or style is being played, stop playback before proceeding.
Connecting to a Computer 7 After selecting the file in the “List of files stored temporarily”, click the downward [Move] button and a confirmation message will appear. Click [OK] and the song will be transferred from the “List of files stored temporarily” to the instrument’s memory. 8 Close the window to end the Musicsoft Downloader. NOTE • End the Musicsoft Downloader to playback the file transferred from your computer. 9 To playback a song stored in flash memory, press the [SONG] button.
e erenc ef R Accessory CD-ROM Installation Guide SPECIAL NOTICES • The software and this manual are the exclusive copyrights of Yamaha Corporation. • Use of the software and this manual is governed by the license agreement which the purchaser fully agrees to upon breaking the seal of the software packaging. (Please read carefully the Software Licensing Agreement at the end of this manual before installing the application.
Accessory CD-ROM Installation Guide CD-ROM Contents e r Folder Name w Application / Data Name Contents Musicsoft Downloader This application can be used to download MIDI song data from the Internet and transfer it from the computer to the instrument’s memory. DMN_ Digital Music Notebook Digital Music Notebook is a combination music learning program and online service that makes it easy and fun to practice and master your favorite songs.
Accessory CD-ROM Installation Guide System Requirements Application/Data Musicsoft Downloader OS Windows 2000/ XP Home Edition/ XP Professional/Vista * Only 32-bit is supported.
Accessory CD-ROM Installation Guide Installing the driver in Windows 2000 Installing the driver in Windows XP 1 Start the computer and use the “Adminis- 1 Start the computer and use the “Adminis- 2 3 4 5 6 trator” account to log on to Windows 2000. Select [My Computer] ➔ [Control Panel] ➔ [System] ➔ [Hardware] ➔ [Driver Signing] ➔ [File Signature Verification], and check the radio button to the left of “Ignore—Install all files, regardless of file signature” and click [OK].
Accessory CD-ROM Installation Guide NOTE • This Wizard window will not appear when using Windows XP Professional x64 Edition. There is no need to restart the computer. 10 When using Windows XP Professional x64 Edition, the Support Module must be installed. After installing the USB-MIDI drivers for all the connected USB devices, select “My Computer” from the Start menu. Right-click the CD-ROM icon and select “Open” from the pop-up menu. Select “USBdrvVista_” → “XPx64SupportModule” → “Setup.
Accessory CD-ROM Installation Guide ■Troubleshooting The driver cannot be installed. • Is the USB cable connected correctly? Check the USB cable connection. Disconnect the USB cable, then connect it again. • Is the USB function enabled on your computer? When you connect the instrument to the computer for the first time, if the “Add New Hardware Wizard” does not appear, the USB function on the computer may be disabled. Perform the following steps.
Accessory CD-ROM Installation Guide NOTE • If the “User Account Control” window appears, click [Continue]. 6 A message asking you to restart your computer in order to complete the uninstall procedure will appear. Driver removal will be complete when you have restarted your computer.
Appendix Troubleshooting Problem Possible Cause and Solution When the instrument is turned on or off, a popping sound is temporarily produced. This is normal and indicates that the instrument is receiving electrical power. When using a mobile phone, noise is produced. Using a mobile phone in close proximity to the instrument may produce interference. To prevent this, turn off the mobile phone or use it further away from the instrument.
Memo DGX-230/YPG-235 Owner’s Manual 93
Scores This demo is an example of how the Easy Song Arranger can be used to change styles throughout a piece. Song No.
Scores DGX-230/YPG-235 Owner’s Manual 95
Scores This score is provided with the intent that the pitch will be corrected by the performance assistant technology feature. If you play the “Play These Notes” part using the performance assistant technology feature, the part will be corrected and played so that it matches the backing part. Song No. 10 q =61 (Function Demo for performance assistant technology) Ave Maria P.A.T. Type =CHORD Your Turn. Repeatedly Play the Same Key.
Scores DGX-230/YPG-235 Owner’s Manual 97
Scores This score is provided with the intent that the pitch will be corrected by the performance assistant technology feature. If you play the “Play These Notes” part using the performance assistant technology feature, the part will be corrected and played so that it matches the backing part. Song No. 11 q =108 (Function Demo for performance assistant technology) Nocturne op.9-2 P.A.T.
Scores DGX-230/YPG-235 Owner’s Manual 99
Voice List ■ Maximum Polyphony ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● The instrument has 32-note maximum polyphony. This means that it can play a maximum of up to 32 notes at once, regardless of what functions are used. Auto accompaniment uses a number of the available notes, so when auto accompaniment is used the total number of available notes for playing on the keyboard is correspondingly reduced. The same applies to the Split Voice and Song functions.
Voice List Voice No.
Voice List Voice No.
Voice List Voice No.
Drum Kit List • “ ” indicates that the drum sound is the same as “Standard Kit 1”. • Each percussion voice uses one note. • The MIDI Note # and Note are actually one octave lower than keyboard Note # and Note. For example, in “117: Standard Kit 1”, the “Seq Click H” (Note# 36/Note C1) corresponds to (Note# 24/Note C0). • Key Off: Keys marked “O” stop sounding the instant they are released. • Voices with the same Alternate Note Number (*1 ... 4) cannot be played simultaneously.
Drum Kit List Voice No.
Style List Style No.
Music Database List MDB No.
Songs Provided On the Supplied CD-ROM File Name 001Nutcr.mid 002Orphe.mid 003Slavo.mid 004Prima.mid 005Medit.mid 006Guill.mid 007Fruhl.mid 008Ungar.mid 009Fruhl.mid 010Dolly.mid 011Cande.mid 012Arabe.mid 013Pasto.mid 014Petit.mid 015Innoc.mid 016Progr.mid 017Taren.mid 018Cheva.mid 019Etude.mid 020Marci.mid 021Turki.mid 022Valse.mid 023Menue.mid 024Momen.mid 025Enter.mid 026Prelu.mid 027Violl.mid 028Angel.mid 029Saraf.mid 030Ameri.mid 031Brown.mid 032Lomon.mid 033Bonni.mid 034Londo.mid 035Banjo.mid 036Vogle.
Effect Type List ● Harmony Types No.
DGX-230/YPG-235 Owner’s Manual Mode Change Control 0,32 1,11,84 6,38 7,10 64 71 72 73 74 91,93 96-97 100-101 Key's Ch's After Touch Pitch Bend Note ON Note OFF Velocity o x o o o x o x x o x o o 0-24 semi x x o 9nH,v=1-127 x 9nH,v=0 *1 *1 *1 *1 *1 0 - 127 : True voice ************** 3 x ************** Default Messages Altered Note Number 1 - 16 x Default Changed Function...
: True # x x x x o x Aux o(120,126,127) o(121) o(122) o(123-125) o x o o x x x o o 0 - 127 *1 Refer to #2 on page 112. Mode 1 : OMNI ON , POLY Mode 2 : OMNI ON ,MONO Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF,MONO :All Sound OFF :Reset All Cntrls :Local ON/OFF :All Notes OFF Mes- :Active Sense sages:Reset o o x x x o o 0 - 127 ************** System : Clock Real Time: Commands Common : Song Pos. : Song Sel.
MIDI Data Format NOTE: 1 By default (factory settings) the instrument ordinarily functions as a 16-channel multi-timbral tone generator, and incoming data does not affect the panel voices or panel settings. However, the MIDI messages listed below do affect the panel voices, auto accompaniment, and songs. • MIDI Master Tuning • System exclusive messages for changing the Reverb Type and Chorus Type. 2 Messages for these control change numbers cannot be transmitted from the instrument itself.
ATTENTION SOFTWARE LICENSE AGREEMENT PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION (“YAMAHA”). BY BREAKING THE SEAL OF THIS PACKAGE YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE.
SIBELIUS SCORCH LICENSE AGREEMENT By installing and/or using this Product you (an individual or legal entity) agree with the Licensor to be bound by the terms of this License which will govern your use of the Product. If you do not accept these terms, do not install or use this Product. The Product is copyright © 1987-2007 Sibelius Software, a division of Avid Technology, Inc, and its licensors. 1.
Specifications Keyboards Song • 76 box type keys (E0–G6), with Touch Response. Display • LCD display (backlit) Setup • STANDBY/ON • MASTER VOLUME: MIN–MAX Panel Controls Performance assistant technology • Chord, Chord/Free • SONG, VOICE, STYLE, EASY SONG ARRANGER, P.A.T.
Index Panel controls and terminals 116 r f +/– .................................................. 13, 51 ........................................................ 50 0–9 .................................................. 13, 51 A-B REPEAT ................................. 12, 71 ACMP ON/OFF ............................. 12, 20 CATEGORY [ ] and [ ] ........... 12, 51 DC IN 12V ..................................... 10, 13 DEMO ............................................ 13, 26 Dial .......................
Index N notation ................................................. 52 O One Touch Setting ................................ 61 P Panel Sustain ........................................ 59 PC Mode ............................................... 81 Performance assistant technology ........ 29 Pitch Bend Range ................................. 76 Power Adaptor ..................................... 10 Preset Song ............................... 25, 27–28 R Recording ...........................................
Limited Warranty 90 DAYS LABOR 1 YEAR PARTS Yamaha Corporation of America, hereafter referred to as Yamaha, warrants to the original consumer of a product included in the categories listed below, that the product will be free of defects in materials and/or workmanship for the periods indicated.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd.
Yamaha Home Keyboards Home Page (English Only) http://music.yamaha.com/homekeyboard Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2007 Yamaha Corporation WM36950 XXXPOXXX.
