User Manual

DGX-660 Owner’s Manual
25
Basic Guide
Enjoying Piano Performance (Piano Room)
The Piano Room function is for those who want to simply, conveniently, and fully enjoy
playing the instrument as a piano. No matter what settings you’ve made from the panel,
you can instantly call up the optimum settings for piano performance with a single but-
ton press. You can also change the piano settings as you desire, or record your perfor-
mance in the Piano Room as an audio file.
1
Press the [PIANO ROOM] button to call
up the Piano Room display.
This operation calls up the panel settings for piano
performance. All other functions except for the
relevant buttons ([BANK], REGIST MEMORY
[1]–[4], CATEGORY [r]/[f], [EXIT], [EXE-
CUTE], [+] (YES), [-] (NO), [METRONOME
ON/OFF], [TEMPO/TAP] buttons), the dial, the
pedal, the PITCH BEND wheel and master vol-
ume setting are disabled.
2
Use the [BANK] and REGIST MEMORY
[1]–[4] buttons to set the desired piano
settings.
To call up the DETAIL display, press the REGIST
MEMORY [4] button.
You can change the display by pressing the REG-
IST MEMORY [4] button repeatedly. (MAIN
DETAIL RECORD MAIN)
MAIN display
Detail setting display
* The settings marked with * (asterisk) will be maintained even if
you exit from this display or turn off the power. Pressing the
[PIANO ROOM] button next time will call up the previously
entered Piano settings.
3
Play the keyboard.
4
Press the [EXIT] button to exit the Piano
Room display.
Playing a Piano Performance in
the Piano Room
• You can change the settings also by using the dial, CATE-
GORY [r]/[f], [+] (YES)/[-] (NO) buttons.
NOTE
Button Function Description
[1]
ENVIRONMENT*
For selecting the environment
(Reverb Type).
CONCERT (Concert Hall)
RECITAL (Recital Hall)
•STAGE
•ROOM
•OFF
[2] PIANO*
For selecting the desired Piano
type.
GRAND (Grand Piano)
POP (Pop Grand)
WARM (Warm Grand)
H. TONK (Honky Tonk)
[3]
LID POS.*
(Lid Position)
Determines how much the Lid is
opened. This cannot be set when
“Honky Tonk” is selected.
[4] DETAIL
For calling up the detailed setting
display.
Button Function Description
[BANK] TOUCH*
For selecting the Touch Response
sensitivity (page 57).
•SOFT
•MEDIUM
•HARD
[1] TUNE*
Determines the pitch of this instru-
ment in 1Hz steps.
Setting range: 416Hz–466Hz
[2]
D. RESO.*
(Damper Reso-
nance)
Determines whether Damper Reso-
nance is applied (ON) or not (OFF).
[3] RESET
Restores all settings of Piano Room
to the default. After a message
appears, press the [+] (YES) button
to restore all settings.
[4] RECORD
For calling up the recording display
(page 26).
• You can turn the Metronome on or off by pressing the
[METRONOME ON/OFF] button. For information on set-
ting the Metronome tempo and time signature, refer to
page 29.
NOTE
Basic Guide