User Manual

Playing Songs and Audio Files
DGX-660 Owner’s Manual
39
Basic Guide
Before using a USB flash drive, be sure to read “Pre-
cautions when using the USB TO DEVICE terminal”
on page 80.
1
If you want to play back a Song or Audio
file on a USB flash drive, connect a USB
flash drive to the USB TO DEVICE termi-
nal.
Audio files must be on a USB flash drive.
2
Press the [SONG/AUDIO] button once or
twice to call up the SONG SELECT dis-
play for Song selecting, or AUDIO
SELECT display for Audio selecting.
The available Songs or Audio files are listed on
the display.
If a USB flash drive is connected, pressing the
[SONG/AUDIO] button repeatedly toggles
between two displays: SONG SELECT and
AUDIO SELECT. If a USB flash drive is not con-
nected, this operation calls up only SONG
SELECT display.
3
Use the dial to select the desired Song
or Audio file.
When selecting Songs, refer to the list on page 38.
4
Press the [START/STOP] button to start
playback.
To stop playback, press the [START/STOP] button
again.
You can adjust the Song volume (page 67) and
Audio volume (page 67).
Adjusting the Tempo of a Song
Same procedure as with Style tempo. See page 63.
Playing Back a Song or Audio
File
• In order to play a file on a USB flash drive, the file must
be stored either in the USB flash drive’s root directory
or a first-level/ second-level folder in the root directory.
Files stored in third-level-folders created inside a sec-
ond-level folder cannot be selected and played by this
instrument.
SONG
AUDIO
Important
USB flash drive (Root)
File
File
File
File
Can be selected/
played
Cannot be selected/
played
• The tempo of audio playback cannot be changed.
AUDIO SELECT display
SONG SELECT display
When this is on, the functions printed
above the buttons are available.
NOTE