User Manual

Handy Performance Features
DGX-660 Owner’s Manual
58
Reference
Setting the Output Gain Level
Output gain level for the PHONES/OUTPUT jack can
be switched among three values: one suitable for a
headphone and the other two for a connected external
audio device.
1
Press the [FUNCTION] button.
2
Press the CATEGORY [r] or [f] but-
ton several times until “Output Gain”
appears.
3
Use the dial to select the desired setting
(below).
Speaker On/Off Setting
You can set whether the sound of this instrument is
always output from its built-in speaker or not when a
plug is inserted to the PHONES/OUTPUT jack.
1
Press the [FUNCTION] button.
2
Press the CATEGORY [r] or [f] but-
ton several times until “Speaker Con-
trol” appears.
3
Use the dial to select the desired setting.
When “NORMAL” is selected the speakers are
automatically shut off when a plug is inserted into
the PHONES/OUTPUT jack. When “ALWAYS
ON” is selected the speaker sound is always on
regardless of whether a plug is inserted or not.
Headphones
Select this when using headphones.
The output gain level is set to an opti-
mum value headphones connection.
When “Headphones” is selected and
external audio equipment is con-
nected to the PHONES/OUTPUT
jack, distortion may be produced.
Line Out
Select this when using external audio
equipment.
The output gain level can be adjusted
by the [MASTER VOLUME] control of
the instrument.
Fixed
Select this when using external audio
equipment.
The output gain level is fixed at the
same level, regardless of the position
of instrument's [MASTER VOLUME]
control.
Current setting
Current setting