User Manual

ManualsBrandsYamaha ManualsElectronic KeyboardsYamaha DGX660B Portable Digital Piano - (Black)

Connections – Using Your Instrument with Other Devices –

DGX-660 Owner’s Manual

Reference

Use the CATEGORY [r] or [f] button

to select “Wireless LAN.”

Press the [EXECUTE] button to call up

the WIRELESS LAN display.

“WIRELESS LAN - Infrastructure Mode” is the

default setting.

Use the CATEGORY [r] or [f] button

to select the desired operation, then

press the [EXECUTE] button.

This operation lets you change the connection

mode.

For information on the WIRELESS LAN displays,

see the next section.

Infrastructure Mode

• When “Wireless LAN” cannot be found even though the

USB wireless LAN adaptor has been connected, turn the

instrument off then on again.

• For information on entering characters for the password

or settings, refer to page 83.

NOTE

Network list Select your personal network from this list to con-

nect automatically, or input the desired one manu-

ally. Use the CATEGORY [r] or [f] button to

select this area, and then follow the instructions

below.

Connecting to a network by selecting from the

list

1. Select the desired network by rotating the dial.

2. Press the [EXECUTE] button.

For a network without a lock icon, this finishes

connecting to the network.

For a network having a lock icon ( ), the

PASSWORD display appears.

3. Enter the password on the PASSWORD display

by rotating the dial.

4. Select “Connect” by using the CATEGORY [r]

or [f] button, then press the [EXECUTE] but-

ton.

Connecting to a network manually

1. Select “Other” displayed at the very end of the

list by rotating the dial.

2. Press the [EXECUTE] button to call up the

OTHER NETWORK display.

3. Make SSID, security, and password settings by

rotating the dial.

4. Select “Connect” by using the CATEGORY [r]

or [f] button, then press the [EXECUTE] but-

ton.

UPDATE Updates the network list on the display.

WPS Connects this instrument to the network via WPS.

1. Select “WPS” by using the CATEGORY [r] or

[f] button, then press the [EXECUTE] button.

2. Press the WPS button on your access point

within two minutes.

INITIALIZE Initializes the connection setup to the default fac-

tory status.

Network list

• Make sure that your access point supports

WPS. About the confirmation and changes in

the access point settings, refer to the manual

of the access point.

NOTE