User Manual

Connections – Using Your Instrument with Other Devices –
DGX-660 Owner’s Manual
79
Reference
Access Point Mode
For information on making settings for/on your
iPhone/iPad, refer to the “iPhone/iPad Connection
Manual” on the website (page 8).
DETAIL Set detailed parameters from the pages below.
Page 1/2: For setting the IP address and other
related parameters.
Page 2/2: For entering the Host name or show-
ing MAC address, etc.
Use the CATEGORY [r] or [f] button to select
the parameters, and then use the dial to set the
value. After making the settings, select “SAVE” on
page 2/2 by using the CATEGORY [r] or [f]
button, and press the [EXECUTE] button to actu-
ally save them.
MODE
CHANGE
Switches to the Access Point mode.
INITIALIZE Initializes the connection setup to the default fac-
tory status.
DETAIL Set detailed parameters from the pages below.
Page 1/2: For setting the SSID, channel, secu-
rity, password, IP address and other related
parameters.
Page 2/2: For entering the Host name or show-
ing MAC address, etc.
Use the CATEGORY [r] or [f] button to select
the parameters, and then use the dial to set the
value. After making the settings, select “SAVE” on
page 2/2 by using the CATEGORY [r] or [f]
button and press the [EXECUTE] button to actu-
ally save them.
MODE
CHANGE
Switches to the Infrastructure mode.
Displaying the wireless network settings.