User Manual

USB Flash Drive Operations
DGX-660 Owner’s Manual
81
Reference
Connecting a USB Flash Drive
1
Connect a USB flash drive to the USB
TO DEVICE terminal, being careful to
insert it with the proper orientation.
2
Wait for confirmation that the USB flash
drive has been properly mounted.
A message (information or confirmation dialog)
sometimes appears on the display to facilitate
operation. Refer to the “Messages” on page 89 for
an explanation of each message.
Mounting
(Flashing)
Mounted
(Lit)
Calling up the FILE CONTROL display
Pressing the [FILE CONTROL] button while the USB
flash drive is connected to the USB TO DEVICE termi-
nal calls up the FILE CONTROL display.
You can access file operations listed below by pressing
the CATEGORY [r] or [f] buttons from the FILE
CONTROL display.
If you press the [FILE CONTROL] button while an
unformatted USB flash drive is connected to the instru-
ment, the “Format” function will automatically be
selected.
To exit from the FILE CONTROL display press the
[EXIT] button.
Menu Reference page
Format 82
Regist Save 83
User Song Save 84
Audio Save 85
Load 86
USB Delete 87
User Delete 87
• No sound will be produced if you play the keyboard
while the FILE CONTROL display is showing. Also, in
this state only buttons related to file functions will be
active.
• The FILE CONTROL display will not appear in any of
the following cases:
• During Style, Song or Audio playback.
• During Lesson and Style Recommender.
• While data is being loaded from a USB flash
drive.
NOTE
NOTE