User Manual

USB Flash Drive Operations
DGX-660 Owner’s Manual
84
Reference
Saving a User Song to USB Flash Drive
This operation saves a User Song (Song numbers
101–105) to USB flash drive.
1
Press the [FILE CONTROL] button to call
up the FILE CONTROL display.
2
Use the CATEGORY [r] or [f] buttons
to call up “User Song Save.”
The SOURCE FILE—a User Song name—will be
highlighted.
3
Use the dial to select the User Song you
want to save.
4
Press the [EXECUTE] button.
The DESTINATION FILE parameter will be high-
lighted, and a default name will automatically be
created.
5
Press the [EXECUTE] button.
A cursor will appear below the first character in
the file name.
6
Change the file name as necessary.
Refer to “Saving a Registration Memory to USB
Flash Drive” on page 83 for filename entry.
7
Press the [EXECUTE] button.
A confirmation message will appear. To cancel the
operation, press the [-] (NO) button.
8
Press the [EXECUTE] button again, or
the [+] (YES) button to execute the Save
operation.
After a while, a message indicating completion of
the operation appears.
The User Song will be saved in a folder labeled
“USER FILES” which will automatically be cre-
ated on the USB flash drive.
9
Press the [EXIT] button to exit from the
FILE CONTROL display.
To Overwrite an Existing File
If you want to overwrite a file that already exists on
the USB flash drive, use the dial to select the file,
then skip ahead to step 7.
The source User
Song name.
• If an existing file name is specified, the display
prompts you for confirmation. Press [EXECUTE] or [+]
if it is OK to overwrite the file, or [-] to cancel.
• The Save operation cannot be cancelled during execu-
tion. Never turn off the power or disconnect the USB
flash drive during the operation. Doing so may result
in data loss.
• The amount of time it will take to perform the Save opera-
tion will depend on the condition of the USB flash drive.
The name of the
file to be saved
Cursor
NOTICE
NOTICE
NOTE