User Manual

USB Flash Drive Operations
DGX-660 Owner’s Manual
85
Reference
Converting a User Song to an Audio file
This operation converts a User Song (Song numbers
101–105) to an Audio file and saves the file to the
USB flash drive.
1
Press the [FILE CONTROL] button to call
up the FILE CONTROL display.
2
Use the CATEGORY [r] or [f] buttons
to call up “Audio Save.”
The SOURCE FILE—a User Song name—will be
highlighted.
3
Use the dial to select the User Song you
want to convert.
4
Press the [EXECUTE] button.
The DESTINATION AUDIO FILE parameter will
be highlighted, and a default name will automati-
cally be created.
5
Press the [EXECUTE] button.
A confirmation message will appear. To cancel the
operation, press the [-] (NO) button.
6
Press the [EXECUTE] button again, or
the [+] (YES) button to execute the Save
(Convert) operation.
This operation starts playback and conversion
from a User Song to an audio file. If you input
audio signals via the AUX IN jack during conver-
sion, that sound also will be recorded.
After a while, a message indicating completion of
the operation appears.
The Audio file will be saved in a folder labeled
“USER FILES” which will automatically be cre-
ated on the USB flash drive.
7
Press the [EXIT] button to exit from the
FILE CONTROL display.
• Only User Songs can be converted to Audio files.
To Overwrite an Existing File
If you want to overwrite a file that already exists on
the USB flash drive, use the dial to select the file,
then go on to the next step.
NOTE
The source User
Song name.
• If an existing file name is specified, the display
prompts you for confirmation. Press [EXECUTE] or [+]
if it is OK to overwrite the file, or [-] to cancel.
• Never turn off the power or disconnect the USB flash
drive during the operation. Doing so may result in data
loss.
• The amount of time it takes to perform the Save operation
depends on the condition of the USB flash drive.
NOTICE
NOTICE
NOTE