User Manual

DGX-660 Owner’s Manual

Reference

Connecting a Microphone and Singing Along with Your Performance

By connecting a microphone to the MIC INPUT jack (standard 1/4” phone jack), you can

enjoy singing along with your keyboard performance or with Song playback. The

instrument outputs your vocals through the built-in speakers. You can enjoy the three

preset settings by just selecting one of them according to the particular circumstances

and your personal preferences, or you can create your own desired settings and save

them.

Connecting a Microphone

Before turning on the power of the

instrument, set the MIC VOLUME knob

to the minimum position.

Connect a microphone to the MIC INPUT

jack.

Turn on the power of the instrument.

Press the [MIC SETTING] button once or

twice to call up the MIC SETTING 1 dis-

play.

Select “MIC” by using the CATEGORY

[r] or [f] button, then set it to “ON”

by rotating the dial.

(If necessary, turn on the microphone.)

Adjust the MIC VOLUME knob while

singing into the microphone.

Adjust the MIC VOLUME knob so that the

INPUT LEVEL meter is not off the scale (or

“pinned” continuously to the right). If the INPUT

LEVEL meter is off the scale, distortion may be

produced.

• Make sure to use a conventional dynamic microphone.

NOTE

Disconnecting the microphone

Set the MIC VOLUME knob to the minimum posi-

tion then disconnect the microphone from the MIC

INPUT jack.

• You can assign the function of switching the MIC ON/OFF

to pedals. Refer to “Assigning specific functions to the

pedal” (page 21).

MIC ON/OFF INPUT LEVEL

NOTE