User Manual

Connecting a Microphone and Singing Along with Your Performance

DGX-660 Owner’s Manual

Reference

Selecting a Preset Setting

Press the [MIC SETTING] button once or

twice to call up the MIC SETTING 1 dis-

play.

Select “PRESET” by using the CATE-

GORY [r] or [f] button, then select

the desired one of “STANDARD”,

“BRIGHTER” and “LOUDER” by rotating

the dial.

If you want to make your original settings, set var-

ious parameters (including those on MIC SET-

TING 2) then save the setting as the USER data.

For details, see next section.

Making and Saving the Micro-

phone Settings

This section explains how to make and save the

detailed settings for the microphone. Only one group

of settings can be saved to USER data.

Connect a microphone to the instru-

ment, then press the [MIC SETTING] but-

ton once or twice to call up the MIC

SETTING 1 or 2 display.

Use the CATEGORY [r] or [f] button

to select the specific parameter to be

adjusted.

For information on each parameter, see below.

Set the value of the specific parameter

by rotating the dial.

STANDARD

The STANDARD setting provides optimum

response over the entire frequency spec-

trum ensuring all vocals sound good.

BRIGHTER

The BRIGHTER setting emphasizes

higher frequencies making vocals stand

out more in the mix.

LOUDER

The LOUDER setting compresses the

overall signal which increases both the

level of your voice and softer sounds.

MIC SETTING 1 display

MIC SETTING 2 display