User Manual

The Functions
DGX-660 Owner’s Manual
74
Reference
Effect
Reverb Type 01–42 ** Refer to page 53.
Chorus Type 01–45 ** Refer to page 53.
DSP ON/OFF * Refer to page 54.
DSP Type 001–239 * Refer to page 54.
Damper Resonance ON/OFF ON Refer to page 21.
Sustain ON/OFF OFF Refer to page 55.
MASTER EQ Type
1 (Normal)/
2 (Piano)/
3 (Soft)/
4 (Bright)/
5 (Powerful)
1 (Normal) Refer to page 57.
Output Gain
Headphones/
Line Out/
Fixed
Headphones Refer to page 58.
I. A. Control ON/OFF ON Refer to page 59.
I. A. Control Depth -3–+3 0 Refer to page 59.
Harmony
(page 31)
Harmony Type 01–26 * Determines the Harmony type.
Harmony Volume 000–127 * Determines the volume of the Harmony effect.
Pedal
Assignable Pedal
SUSTAIN,
PORTAMENTO,
MIC ON/OFF,
START/STOP,
TAP TEMPO
SUSTAIN Refer to page 21.
Portamento Time 000–127 064
Determines the pitch transition time (page 21). Higher val-
ues result in a longer pitch change time. Setting this to “0”
results in no effect.
PC
(USB TO
HOST terminal)
PC Mode PC1/PC2/OFF OFF
Optimizes the MIDI settings when transmitting or receiving
the performance data between the computer and the instru-
ment (page 75).
MIDI***
Local ON/OFF ON
Determines whether the instrument’s keyboard controls the
internal tone generator (ON) or not (OFF). When you record
your keyboard performance to the application software on
the computer via MIDI, set this parameter to OFF.
External Clock ON/OFF OFF
Determines whether the instrument synchronizes to the
internal clock (OFF) or an external clock (ON). When you
record your keyboard performance to the application soft-
ware on the computer via MIDI, set this parameter to ON.
Keyboard Out ON/OFF ON
Determines whether MIDI messages generated via key-
board performance are transmitted (ON) or not (OFF) from
the USB TO HOST terminal.
Style Out ON/OFF OFF
Determines whether MIDI messages generated via Style
playback are transmitted (ON) or not (OFF) from the USB
TO HOST terminal.
Song Out ON/OFF OFF
Determines whether MIDI messages generated via Song
playback are transmitted (ON) or not (OFF) from the USB
TO HOST terminal.
Initial Setup ON –
Lets you send the data of the panel settings to a computer.
Press [+] to send, or press [-] to cancel during sending. This
operation should be done immediately after starting the
Recording operation on the computer.
Category Function Range/Settings Default Value Description