User Manual

USB Flash Drive Operations
DGX-660 Owner’s Manual
82
Reference
Formatting a USB Flash Drive
The Format operation lets you prepare commercially
available USB flash drive for use with this instrument.
1
Press the [FILE CONTROL] button to call
up the FILE CONTROL display.
2
Use the CATEGORY [r] or [f] buttons
to call up “Format.”
3
Press the [EXECUTE] button.
A confirmation message will appear. To cancel the
operation, press the [-] (NO) button.
4
Press the [EXECUTE] button again or
the [+] (YES) button to execute the For-
mat operation.
After a while, a message indicating completion of
the operation appears, and the “USER FILES”
folder will be created on the root directory in the
USB flash drive.
5
Press the [EXIT] button to exit from the
FILE CONTROL display.
• If a USB flash drive that contains data is formatted as
described below, the data will be erased. Make sure that a
USB flash drive to be formatted contains no important data
before carrying out the formatting procedure.
• The Format operation cannot be cancelled during exe-
cution. Never turn off the power or disconnect the USB
flash drive during the operation. Doing so may result
in data loss.
NOTICE
NOTICE