User Manual

CVP-709/CVP-705 Reference Manual 21

Showing the Text Display and Editing

Text Display Settings

You can view the text file (.txt) created by using a computer on the instrument’s display. This feature enables various

useful possibilities, such as the showing of lyrics, chord names, and text notes.

If you want to view the text in a USB flash drive, connect the USB flash drive containing text data to the [USB TO

DEVICE] terminal beforehand.

1 Call up the Text display via [Menu] → [TextViewer].

2 Touch the bottom left corner on the display to call up the Text File Selection display.

3 Select the desired text file, and touch [Close] to show the text in the display.

If the text extends over several pages, you can scroll through the entire text by touching [] or [], which are

shown at the right and left of the page. To clear the text from the display, touch [×] located at right of the text file

name.

NOTE • Line breaks are not automatically entered in the instrument. If a sentence is not displayed in its entirety because of

limitations in the screen space, enter line breaks manually on your computer by using a text editor, etc. beforehand.

• The Text can be displayed on an external monitor or television. For details on instructions, refer to the Owner’s Manual.

• Information about Text File selection can be memorized to the Registration Memory. For details, refer to the Owner’s

Manual.

• You can change the page by flicking horizontally on the display.

Showing the Text Display

Page