User Manual

Creating/Editing Styles (Style Creator)
CVP-709/CVP-705 Reference Manual
56
Dynamics
This changes the velocity/volume (or accent) of certain notes in the Style playback. The Dynamics
settings can be applied to each channel individually or all channels of the selected Style.
Accent Type
Determines the type of accent applied — in other words, which notes are
emphasized.
Strength
Determines how strongly the selected Accent Type (above) will be applied. The
higher the value, the stronger the effect.
Expand/
Compress
Expands or compresses the range of velocity values. Values higher than 100%
expand the dynamic range, while values lower than 100% compress it.
Boost/Cut
Boosts or cuts all velocity values. Values above 100% boost the overall velocity,
while values below 100% reduce it.
Apply To All
Channels
When set to “On,” the settings in this display will be applied to all the channels
of the current Section.
When set to “Off,” the settings in this display will be applied to the channel
specified at the “Target Ch” in the Channel Edit display.
Quantize
Same as in the Song Creator (page 71), with the exception of the two additional available parameters
below.
Eighth notes with swing
Sixteenth notes with swing
Vel oc ity
Boosts or cuts the velocity of all notes in the specified channel, according to the percentage specified
here.
Bar Copy
This function allows data to be copied from one measure or group of measures to another location
within the specified channel.
Source Top
Specifies the first (Source Top) and last (Source Last) measures in the region to
be copied.
Source Last
Destination
Specifies the first measure of the destination location, to which the data is to be
copied.
Bar Clear
This function clears all data from the specified range of measures within the selected channel.
Remove
Event
This function lets you remove specific events from the selected channel.