User Manual

CVP-709/CVP-705 Reference Manual 90

MIDI Settings

In this section, you can make MIDI-related settings for the instrument. This instrument gives you a set of ten pre-

programmed templates that let you instantly and easily reconfigure the instrument to match your particular MIDI

application or external device. Also, you can edit the pre-programmed templates and save up to ten of your original

templates.

NOTE No MIDI signals are received in the Piano Room.

1 Touch the box (shown above), then select a pre-programmed MIDI template (below).

If you have already created an original MIDI template and saved it to User memory (in steps 2 and 3 below), you can

also select that template from User memory.

2 If desired, edit the MIDI parameters based on the MIDI template selected in step 1 in the

relevant setting display.

• System: Lets you set the MIDI System related parameters.........................................................................page 91

•

Transmit: Lets you set the MIDI Transmission related parameters.........................................................page 92

•

Receive: Lets you set the MIDI Reception related parameters. .................................................................page 93

•

On Bass Note: Lets you select the MIDI channels of which the MIDI data coming from the external MIDI

device will be used for detecting the bass note for Style playback. .............................................................page 94

•

Chord Detect: Lets you select the MIDI channels of which the MIDI data coming from the external MIDI

device will be used for detecting the chord type for Style playback............................................................page 95

3 When you’ve finished editing in each display, touch (Save) to save the MIDI settings as

your original MIDI Template.

NOTE Your original MIDI templates can be saved as a single file to a USB flash drive. On the display called up via [Menu] 

[Utility]  [Factory Reset/Backup]  page 2/2, touch [Backup] of “MIDI” to execute the Save operation (page 99).

 Pre-programmed MIDI Templates

All Parts

Transmits all parts including the keyboard parts (Main, Layer and Left), with the

exception of Song parts.

KBD & STYLE

Basically the same as “All Parts” with the exception of how keyboard parts are managed.

The right-hand parts are handled as “Upper” instead of Main and Layer, and the left-hand

part is handled as “Lower.”