User Manual

MIDI Settings
CVP-709/CVP-705 Reference Manual
94
The explanations here apply when you call up “On Bass Note” display in step 2 on page 90. The settings here let you
determine the bass note for Style playback, based on the note messages received via MIDI. The note on/off messages
received at the channel(s) set to on are recognized as the bass notes of the chords for Style playback. The bass note will be
detected regardless of the [ACMP ON/OFF] or Split Point settings. When several channels are simultaneously set to on,
the bass note is detected from merged MIDI data received over the channels.
Touch the desired channel number to enter the checkmark. Touch the same location again to remove the checkmark.
MIDI transmission/reception via the USB terminal, Wireless LAN, and MIDI terminals
The relationship between the MIDI terminals, Wireless LAN and the [USB TO HOST] terminal which can be used
for transmitting/receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as follows:
On Bass Note – Setting the Bass Note for Style Playback
USB2
USB1
MIDI transmission
MIDI OUT
terminal
Wireless
LAN
USB TO HOST
terminal
Merge
MIDI/USB1/
Wireless LAN 1 – 16
MIDI reception
MIDI IN
terminal
Port handling
USB2
1 – 16
Wireless
LAN
USB TO HOST
terminal
MIDI/USB1/Wireless LAN 1 – 16