User Manual

Making Global Settings (Utility)

CVP-709/CVP-705 Reference Manual

This function is used to “lock” specific parameters (effect, split point, etc.) to make them selectable only via the panel

control — in other words, instead of being changed via Registration Memory, One Touch Setting, Music Finder, or Song

and sequence data.

To lock the desired parameter, touch the corresponding box to enter the checkmark. To unlock the parameter, touch the

box again.

This lets you execute the Format operation or check the memory capacity (approximate value) of the USB flash drive

connected to this instrument. For details on instructions, refer to the Owner’s Manual.

Display/Touch Screen

Display Home Theme

Touch and change the theme (background) of the Home display.

The available settings are Piano/White/Black.

Brightness

Touch [L]/[R] to adjust the brightness of the display.

Time Stamp

Determines whether the time stamp of a file is shown on the User tab of the File

Selection display or not.

NOTE When the instrument is connected to a network via the USB wireless LAN adaptor*, the

current time is taken from the network and displayed. For details, refer to page 103.

* A USB wireless LAN adaptor may not be included depending on your area.

Pop-up

Display Time

Determines the time that elapses before the pop-up windows close. Pop-up windows

appear when you press buttons TEMPO [-]/[+], TRANSPOSE [-]/[+], SONG

CONTROL [LL ](REW)/[RR ](FF), or REGISTRATION BANK [-]/[+]. When

“Hold” is selected here, the pop-up window is shown until you touch [X].

Transition

Effect

Turns on or off the Transition Effect which is applied when the display is changed.

Voice Area

Determines which keyboard parts are shown in the Voice area of the Home display.

When “Show Active Parts Only” is selected, only the active keyboard parts are

shown. When “Show All Parts” is selected, all the keyboard parts are shown.

To u c h

Screen

Sound

Determines whether or not touching the display will trigger the click sound.

Calibration

Lets you calibrate the display when it does not respond properly to your touching

(Normally, you do not need this operation, since it is calibrated by factory default).

Touch here to call up the Calibration display, then touch the center of the plus marks

(+) in order.

Parameter Lock

USB Flash Drive