User Manual

14
YDS-150 Owner’s Manual
2 While holding the [Fn] button, press the C key.
This puts the instrument in pairing standby. Keep hold-
ing the [Fn] button.
• LED screen: [B--] Pairing standby
• LED screen: [---] Bluetooth function off
3 While holding the [Fn] button, press the VOICE
[ ] button to begin pairing.
The LED screen will change to the following display
and the Bluetooth lamp will flash rapidly.
4 Select the connection on the smart device.
Select [YDS-150 Audio] if handling audio.
5 When pairing is complete, the Bluetooth lamp
will switch from quickly flashing to staying on.
If pairing fails, the Bluetooth lamp flashes slowly and
the LED display changes to [B--].
6 If five minutes elapse since starting pairing in
Step 3, pairing fails.
7 Release the [Fn] button.
Operation returns to the Voice selection screen.
Using the Dedicated App
You can use the dedicated app for this instrument to per-
form settings for the functions of this instrument more con-
veniently.
1 Install the dedicated app for this instrument on
your smart device.
2 Connect this instrument and your smart device via
Bluetooth.
You can perform the following settings for this instrument
on the app. For details, refer to the manual for the app.
• Editing user Voices / editing fingering information /
enabling and disabling Voice selection shortcuts, etc.
Instrument Maintenance after Playing
Before storing this instrument in its case, remove the
mouthpiece from this instrument and wipe off any moisture
near the bell and mouthpiece.
1 Loosen the ligature screws and remove the reed
and ligature from the mouthpiece.
2 Hold the mouthpiece firmly and turn it from side
to side to slide it off from the neck.
3 Use a cleaning swab (sold separately) to clean
the inside of the mouthpiece.
* Be careful not to damage the tip of the mouthpiece.
* Always keep the cleaning swab clean and dry.
4 Wipe the bell and keys with a dry, soft cloth.
NOTE
• To cancel the pairing, press the VOICE [ ] button.
NOTE
• While paired, the Bluetooth lamp stays lit up.
• Depending on your smart device, audio can play at a
high or uncomfortable volume level. Adjust the volume
of your smart device before playing audio.
NOTICE
• When removing the mouthpiece, avoid applying a bend-
ing force to the neck base. Excessive force applied to
the neck can damage it.
Ligature screws
Reed