Digital Sound Projector Speaker Bar and Subwoofer Manual

43 En
Setup menu
PREPARATION
CONNECTION/
INITIAL SETTINGS PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
INPUT MENU  INPUT RENAME
Use to change the name of the input source displayed when the
input source is selected. Select a name from templates, or enter an
original name.
■ Selecting a name from templates
■ Entering an original name
Menu: HDMI SETUP
Use to configure the settings related to HDMI signals and HDMI
control function.
■ HDMI control
Sub menu: HDMI CONTROL
Use this function to link this unit and an HDMI control-
compatible TV via HDMI. For details, see “Operating the unit by
TV’s remote control (☞p. 24)”.
Selectable item: OFF*, ON
“OFF”: Disable the control function. The standby power
consumption of this unit decreases.
“ON”: Enable the control function.
■ Audio playback component
Sub menu: SUPPORT AUDIO
Use to select a component to play back HDMI audio signals. This
setting is effective when “HDMI CONTROL” is set to “OFF”.
5)
Selectable item: YSP-2200*, OTHER
“YSP-2200”: Play back the input sound signal.
“OTHER”: Play back the equipment connected to HDMI OUT
(ARC) jack.
Input rename
1
Press U / V key to select the input
source to be renamed.
2
Press Y/Z key to select a input source
name.
Selectable item: Blu-ray, DVD, DVR, CATV,
Satellite, Game
3
To exit the menu, press RETURN key.
1
Press U / V key to select the input
source to be renamed.
2
Press ENTER key.
“T” appears above the new name display to indicate the
position to be entered.
3
Press Y/Z key to place the _
(underscore) under the space or the
character you want to edit.
4
Press U / V key to select the desired
character.
4)
5
Repeat steps 3 and 4 to edit other
characters.
6
To complete the setting, press ENTER
key.
7
To exit from the menu, press RETURN
key.
HDMI setup
A to Z, 0 to 9, a to z, and symbols (!, ?, <, >, etc.) are available for input.
HDMI video signals input to one of the HDMI IN jacks of this unit are
always output from the HDMI OUT (ARC) jack of this unit.
4) y
5) y