Digital Sound Projector Manual

Setup menu
62 En
Adjust the volume of each channel to balance output levels. Use
test sounds output from each channel to adjust volume for
optimal balance.
1)
Sub menu: Front L, Front R, Center, Surround L,
Surround R, Subwoofer
Adjustable range: -20 to +20
Adjust this unit’s volume and dynamic range
3)
for optimal
balance. When “ON” is selected, dynamic range is adjusted as
follows for optimal listening at low volumes, such as might be
used at night.
When the volume level is low:
Narrow the dynamic range. Loud sound is played back softer, and
soft sound which is hard to be listened to is played back louder.
When the volume level is high:
Widen the dynamic range. For both soft and loud sounds, source
sound is played back without adjusting volume.
Selectable item: ON*, OFF
“ON”: Adjust the dynamic range automatically.
“OFF”: The dynamic range is not adjusted automatically.
BEAM
TV
AUX
SOUND settings
SPEAKER LEVEL
Adaptive DRC
2)
On
On
Output level Output level
Off
Off
Input level Input level
Volume: low Volume: high
When the sound beam output method is set to “MY SUR.” (My
Surround) with the BEAM key, the following items can be configured.
Sub menu: Center, Surround L/R, Subwoofer
• When set to “ON”, “DYNAMIC RANGE” is automatically set to
“Max”.
• This setting is not available when the UniVolume function is enabled.
1) y 2) y