Digital Sound Projector Owner's Manual

83 En
MANUAL SETUP
ADVANCED
OPERATION
English
■ INPUT TRIM (Input trim)
Use to adjust the input level of the input source.
• Select TV/STB ANALOG to adjust the level of audio
and video signals input at the TV/STB AUDIO INPUT
jacks of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select TV/STB DIGITAL to adjust the level of audio
and video signals input at the TV/STB OPTICAL
DIGITAL INPUT jack of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select DVD DIGITAL to adjust the level of audio and
video signals input at the DVD COAXIAL DIGITAL
INPUT jack of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select AUX1 ANALOG to adjust the level of audio and
video signals input at the AUX1 AUDIO INPUT jacks
of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select AUX1 DIGITAL to adjust the level of audio and
video signals input at the AUX 1 OPTICAL DIGITAL
INPUT jack of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select AUX2 DIGITAL to adjust the level of audio and
video signals input at the AUX 2 COAXIAL DIGITAL
INPUT jack of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select AUX3 ANALOG to adjust the level of audio
signals input at the AUX 3 input jack on the front panel.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select DOCK ANALOG to adjust the level of audio
signals input at the DOCK terminal of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
■ INPUT RENAME (Input rename)
Use to change the name of the input source in the OSD
and the front panel display. Press an input selector button
(e.g., DVD) to select the component you want to change
the name for and perform the following procedure.
1 Press / to place the _ (underscore) under
the space or the character you want to edit.
The _ (underscore) flashes.
2 Press / to select the desired character.
• You can use up to 8 characters for each input.
• Press to change the character in the following
order or press to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, #, *,
+, etc.
3 Repeat steps 1 to 2 to rename each input.
4 Press ENTER to exit.
The new names are registered, and the display returns
to the previous screen.
TV/STB ANALOG;;;-3.0dB
DIGITAL;;-3.0dB
DVD DIGITAL;;-3.0dB
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
C)INPUT TRIM 1/2
p
p
.
p
p
AUX1 ANALOG;;;-3.0dB
DIGITAL;;-3.0dB
AUX2 DIGITAL;;-3.0dB
AUX3 ANALOG;;;-3.0dB
DOCK ANALOG;;;-3.0dB
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
C)INPUT TRIM 2/2
p
p
.
p
p
DVD -> DVD
[ ]/[ ]:Position
[ ]/[ ]:Character
[ENTER]:Return
D)INPUT RENAME
p
p
p
p
ENTER
ENTER
ENTER