Digital Sound ProjectorTM Owner’s Manual English for North America
The “ Corporation. ” logo and “IntelliBeam” are trademarks of Yamaha Manufactured under license from Cambridge Mechatronics Ltd. Worldwide patents applied for. The “ ” logo and “Digital Sound Projector™” are trademarks of Cambridge Mechatronics Ltd. The “ ” logo and “Cinema DSP” are registered trademarks of Yamaha Corporation. “HDMI”, the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks or registered trademarks of HDMI Licensing LLC.
INTRODUCTION CONTENTS INTRODUCTION Features........................................................................... 4 General operation flow .................................................. 5 Controls and functions................................................... 6 Adjusting volume level automatically (UniVolume)....... 31 Using the HDMI™ control function................................ 31 Using the sleep timer .......................................................
INTRODUCTION Features Digital Sound Projector The Digital Sound Projector technology allows one slim unit to control and steer multiple channels of sound to generate multichannel surround sound, thus eliminates the need for satellite loudspeakers and cabling normally associated with conventional surround sound systems. This unit also employs the beam modes that let you enjoy the surround sound (5 Beam, Stereo+3 Beam, 3 Beam for 5.1-channel audio, 5 Beam plus 2, Stereo + 3 Beam plus 2, 3 Beam for 7.
INTRODUCTION General operation flow 2 Run AUTO SETUP to optimize the beam and sound settings. “AUTO SETUP (IntelliBeam)” (page 15) 3 Play back a source. “Playback” (page 21). 4 Change the playback method (surround/stereo), CINEMA DSP and/or beam modes settings. “Playback mode” (page 22). 5 Configure this unit's settings and/or set remote control codes. “Customizing this unit (SET MENU)” (page 33), “Controlling external components” (page 42).
Controls and functions Front panel 12 4 5 INPUT VOLUME 1 Remote control sensor Receives infrared signals from the remote control (page 14). 2 Power LED Lights up when the power is turned on (page 21). 3 Front panel display Shows information about the operational status of this unit (page 7). 4 INPUT Press repeatedly to switch between input sources. 5 VOLUME +/– Controls the volume level of all audio channels.
INTRODUCTION Front panel display 12 3 4 5 6 7 A HD MSTR HI RES Neo:6 ES DSCRT MTRX SLEEP O UNIVOLUME ENHANCER BASS EXT 0 96 24 m ft dB B C VOL L C R SL SB SR EX1 LFE EX2 D 8 SLEEP indicator Lights up when the sleep timer is set (page 31). 2 CINEMA DSP indicator Lights up when a sound field program is selected (page 22). 9 Volume level indicator Displays the current volume level.
Rear panel B C 1 OUT HDMI IN 1 FRONT SURROUND IR-OUT SUR. BACK PRE OUT IN 2 IN 3 OUT 1 HDMI A IN 1 IN 4 IN 2 COMPONENT PR PB VIDEO Y IN VIDEO IN 3 SUB WOOFER SIRIUS VIDEO OUT L L R R AUX 1 TV AUDIO IN AUX 2 SYSTEM CONNECTOR AUX 1 DIGITAL IN IN 4 TV IR IN RS-232C L CENTER R R R SUB WOOFER FRONT L SURROUND L SUR.
INTRODUCTION Remote control A AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod RADIO MOVIE MUSIC ENTER TAINMENT E CINEMA DSP program keys Select the CINEMA DSP programs (page 22). C F SURROUND/STEREO Switches between surround and stereo playback (page 22).
PREPARATION Installation This section describes a suitable installation location to install this unit using a wall mount bracket, a rack, a table top stand or a floor stand. To achieve desired surround sound effects, install this unit where there are no objects such as furniture obstructing the path of sound beams (page 11). Depending on your installation environment, connections with external components (page 12) should be done before installation.
INTRODUCTION ■ Ideal installation condition : Object such as furniture Parallel installation (with 5Beam) Corner installation (with Stereo+3Beam) 40° to 50° PREPARATION ■ For better listening environment Example 1 Install this unit as close to the exact center of the wall as possible. PLAYBACK FEATURES Example 2 Install this unit so that the sound beams can be reflected off the walls. SETTINGS Example 3 Install this unit as close to the exact front of your normal listening position as possible.
Connections Component video pin cable Before connecting components ■ Cables used for connections The symbols on the left of cable names (such as , , and ) correspond with the symbols described in “Connecting your TV and Blu-ray disc player” (page 12) and “Connecting audio video components” (page 13). ■ Information on HDMI An HDMI cable can transmit both audio and video signals at the same time. If your TV and other components have HDMI jacks, use HDMI cables for simpler and easier connections.
Determine the connection types depending on the jacks available on this unit and your external components. The symbols in the following table correspond with the symbols described in “Cables used for connections” (page 12).
Connecting the FM antenna Connect the supplied FM antenna or your antenna to the FM ANTENNA jack on this unit. Antenna TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod RADIO MOVIE ENTER TAINMENT MUSIC OFF CINEMA DSP SURROUND STEREO TOP MENU MENU OPTION SETUP RETURN TV VOL CH VOLUME TV TV MUTE UNIVOLUME FM ANTENNA G ENTER INPUT MUTE SUR.
INTRODUCTION Changing OSD language You can select an OSD language among English, German, French, Spanish, Italian, Dutch and Russian. Before operating the following steps, select this unit as the video input on your TV. 1 3)LANGUAGE SETUP . ENGLISH DEUTSCH Francais ESPANOL ITALIANO NEDERLANDS 2 Press G / to select the desired language and then press GENTER.
■ Assembling the supplied cardboard microphone stand 1 TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod RADIO MOVIE ENTER TAINMENT MUSIC 2 Remove “SOUND OPTIMZ ONLY” CINEMA DSP STEREO G ENTER TOP MENU MENU OPTION SETUP RETURN TV VOL CH VOLUME I 3 TV Fit in Place horizontally 4 TV MUTE UNIVOLUME INPUT (Beam optimization only) Use to optimize the beam angle so that the parameter best matches your listening environment. This menu takes about one minute.
y Press G / to select “AUTO SETUP” and then press GENTER. B)AUTO SETUP p p [ ]/[ ]:Up/Down [ENTER]:Enter Press G / to select “BEAM+SOUND OPTIMZ”, “BEAM OPTIMZ ONLY” or “SOUND OPTIMZ ONLY” and then press GENTER. 6 Press GENTER to confirm the results. The menu screen disappears in two seconds.
■ Error messages for AUTO SETUP TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 iPod RADIO HDMI 4 MOVIE ENTER TAINMENT MUSIC If an error message is displayed on your TV, check the error message list to solve the problem and then follow the procedure below. [ERROR E-1]: Press GENTER to run the AUTO SETUP procedure again or IRETURN to cancel the operation Other errors: Press IRETURN to cancel the operation and then run the AUTO SETUP procedure again.
INTRODUCTION Using the system memory You can save the current beam and sound settings in the system memory of this unit. It is handy to save certain settings according to the varying conditions of your listening environment. For example, if there are curtains in the path of sound beams, the effectiveness of the sound beams will vary depending on whether the curtains are open or closed. y Saving settings 1 5 Press ISETUP. 2)MEMORY SAVE MEMORY1 Saving... p p .
4 C TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod RADIO MOVIE ENTER TAINMENT MUSIC Press G / to select the memory number to be loaded and then press GENTER. D 1)MEMORY LOAD MEMORY1 Load Now ? OFF CINEMA DSP SURROUND STEREO G ENTER TOP MENU OPTION SETUP RETURN TV VOL CH VOLUME K TV TV MUTE INPUT UNIVOLUME 5 Press GENTER. The beam and sound settings saved in the selected memory number are loaded. MUTE SUR.
INTRODUCTION PLAYBACK FEATURES Playback Playing back sources 1 Press CPower (p) key to turn on this unit. 2 Turn on external components (TV, Blu-ray disc player, etc.) connected to this unit. 3 Press one of the DInput selector keys to select an external component as an input source. Input source name y • You can change the input source name displayed on the front panel display (page 38).
Status When PCM signals are being input TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod MOVIE OFF PCM E y • You can select an audio signal to be played back (Auto or DTS) In “Decoder Mode” (page 32).
Press the desired ECINEMA DSP key. The CINEMA DSP category name appears in the front panel display and the CINEMA DSP indicator (page 7) lights up. 2 While the category name is displayed, press the ECINEMA DSP key repeatedly. Each time you press the key, program switches. ■ Movie (MOVIE) Sci-Fi This program clearly reproduces dialogs and special sound effects of the latest science fiction films and lets you feel a broad and expansive cinematic space.
3 Beam TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod RADIO MOVIE ENTER TAINMENT MUSIC OFF y STEREO G ENTER TOP MENU MENU OPTION SETUP RETURN TV VOL CH VOLUME TV TV MUTE INPUT UNIVOLUME This unit can decode 2-channel sources for 7.1-channel or 5.1-channel playback so that you can enjoy a variety of surround sound effects by switching the decoder.
INTRODUCTION FM tuning The FM tuner of this unit provides the following two modes for tuning. Note • Frequency tuning mode You can tune into a desired FM station by searching or specifying its frequency. • When you press NNumeric keys during preset tuning, a preset number is selected. Set the tuner to the frequency tuning mode using PTUNING / prior to the operation. Note Adjust the FM antenna connected to this unit for the best reception.
3 TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 iPod RADIO HDMI 4 MOVIE ENTER TAINMENT MUSIC D Press PPRESET / to select the preset number to which the station will be registered. When you select a preset number to which no station is registered, “Empty” appears. When you select a preset number to which any station has been already registered, the frequency of the station is displayed.
SIRIUS Satellite Radio™ operations 1 Press DRADIO repeatedly to select “SIRIUS”. The SIRIUS indicator lights up on the front panel display and the SIRIUS Satellite Radio information for the currently selected channel appears on the front panel display. Light up Note SIRIUS 184 Weather • If “ANTENNA ERR” appears on the front panel display, the connection of the SiriusConnect tuner or antenna is incorrect. In such cases, check the connection of the SiriusConnect tuner and the antenna.
■ Category Search mode 1 TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod RADIO MOVIE ENTER TAINMENT MUSIC Press PCATEGORY / repeatedly to select the channel category. The CATEGORY indicator lights up on the front panel display during channel category selection. When you select the category, the first channel in the category is selected.
Note You can clear the assignments of preset SIRIUS Satellite Radio channels. Press IOPTION on the remote control. The option menu for “SIRIUS” appears on the front panel display. 2 Press G / repeatedly to select “Clear Preset” and then press GENTER. • If a code number is already registered and you enter the different number, “Wrong” appears and the screen returns to step 3. Enter the correct code number. • If you forget the Parental lock code or want to change it, reset it using “SIRIUS PIN” (page 41).
Displaying the SIRIUS Satellite Radio™ information TV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod RADIO MOVIE Use this feature to display the SIRIUS Satellite Radio information on the front panel display. AV ENTER TAINMENT MUSIC D OFF • If a status message or an error message appears on the front panel display, see “SIRIUS Satellite Radio” (page 44). CINEMA DSP SURROUND STEREO Press RINFO repeatedly to toggle the following SIRIUS Satellite Radio information display modes.
INTRODUCTION Useful features Adjusting volume level automatically (UniVolume) 1 Select this unit as the input source of the TV. 2 Turn on the HDMI control device (Blu-ray disc or DVD player) connected to this unit. 3 Select the HDMI control device (Blu-ray disc or DVD player) as the input source of this unit to check the video input. Press MUNIVOLUME. The UNIVOLUME indicator lights up on the front panel display.
Configuring settings for each input source (Option menu) TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod RADIO MOVIE ENTER TAINMENT MUSIC D OFF CINEMA DSP SURROUND STEREO G ENTER TOP MENU You can configure various settings for each input source (TV, AUX1/2, HDMI1-4, iPod, FM and SIRIUS). Available menu items vary depending on the selected input source. 1 Press DInput selector keys to select the desired input source. 2 Press IOPTION.
INTRODUCTION SETTINGS Customizing this unit (SET MENU) You can manually configure various settings for this unit in “SET MENU”. Menu MEMORY AUTO SETUP Features Page LOAD Loads the beam and sound settings saved in the memory. 19 SAVE Saves the current beam and sound settings to the memory. 19 BEAM+SOUND OPTIMZ Optimizes the beam and sound settings automatically. 16 BEAM OPTIMZ ONLY Optimizes the beam settings automatically. 16 SOUND OPTIMZ ONLY Optimizes the sound settings automatically.
Basic SET MENU operation 1 TV 1 Press ISETUP. AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod RADIO MOVIE ENTER TAINMENT MUSIC D SET MENU . ;MEMORY ;AUTO SETUP ;MANUAL SETUP ;SOUND SET MENU ;SOUND OUT MENU ;INPUT MENU ;DISPLAY MENU [ ]/[ ]:Up/Down [ENTER]:Enter OFF CINEMA DSP SURROUND STEREO FLAT TO WALL MENU I OPTION SETUP RETURN TV VOL CH VOLUME TV 2 Press G / to select the desired menu and then press GENTER.
3 FLAT TO WALL INTRODUCTION Control range (from this unit): 1.8 m to 9.0 m (6.0 ft to 30.0 ft) Control range (from left wall): 0.6 m to 11.4 m (2.0 ft to 38.0 ft) Configure “BEAM TRAVEL LENGTH”. Adjust the distance that sound beams travel after being output and reflected off the wall until they arrive at the listening position so that all sounds can arrive at the listening position at the same time. Note • Configure this setting only when you have adjusted “HORIZONTAL ANGLE”. PREPARATION 1.8 to 9.
You can adjust this parameter only when “5BeamPlus2”, “5 Beam” or “3 Beam” is selected in “BEAM MODE” (page 23). y • To adjust the volume of each channel, see “CHANNEL LEVEL” (page 37) Choices: OFF*, ON • Select “ON” to configure the sound direction. 1 Adjust the image location for the front left channel (LEFT). The higher the percentage, the louder the output from the center Without adjustment 2 With the front left channel adjusted Adjust the image location for the front right channel (RIGHT).
SET MENU → SOUND SET MENU → DRC:Dynamic Range Control Use to adjust the dynamic range compression. Dynamic range is the difference between the smallest sound that can be heard above the noise of the equipment and the biggest sound that can be heard without distortion. Input level Volume : low Output level Off On Off Input level Volume : high Choices: On*, Off • Select On to enable the adaptive dynamic range control. • Select Off to disable the adaptive dynamic range control.
TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 iPod RADIO MOVIE ENTER TAINMENT MUSIC SOUND OUT (Sound output redirection) Use to redirect the output of audio signals. Audio output of all the channels switches simultaneously. Choices: SPEAKER*, PRE OUT • Select SPEAKER to output sounds from this unit. • Select PRE OUT to output audio signals from the PRE OUT jacks of this unit. You also need to configure the parameters from “BASS OUT” to “LFE Level” described below.
Press G / to select a input source name. Choices: TV, Blu-ray, DVD, HDDVD, STB, Satelite, Game 3 To exit from the menu, press IRETURN. Entering an original name 2 Press GENTER. “ ” appears above the new name display to indicate the position to be entered. 3 Press G / to place the _ (underscore) under the space or the character you want to edit. 4 Press G character. 5 Repeat steps 3 and 4 to edit other characters. 6 To complete the setting, press GENTER. 7 To exit from the menu, press IRETURN.
C TV AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 iPod RADIO HDMI 4 MOVIE ENTER TAINMENT MUSIC OFF E CINEMA DSP SURROUND STEREO G ENTER TOP MENU F MENU OPTION SETUP RETURN TV VOL CH VOLUME TV I ■ OSD SETUP (OSD setup) ■ LANGUAGE SETUP (Language setup) SET MENU → DISPLAY MENU → OSD SETUP Use to adjust the display position and select the background color of the OSD. SET MENU → DISPLAY MENU → LANGUAGE SETUP Use to select the language used in the OSD.
SIRIUS PIN (SIRIUS Satellite Radio PIN) Reset the Parental Lock cord for SIRIUS Satellite Radio. Choices: CANCEL*, RESET MEMORY PROTECT (Memory protect) Protect the settings you have saved in the system memory. To protect the settings, select “PROTECT: ON”.
A Controlling external components B TV C AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 iPod RADIO HDMI 4 MOVIE ENTER TAINMENT MUSIC D OFF CINEMA DSP SURROUND STEREO G ENTER TOP MENU H I J MENU OPTION SETUP RETURN TV VOL CH VOLUME K TV TV MUTE INPUT UNIVOLUME SUR.
INTRODUCTION APPENDIX Troubleshooting PREPARATION Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center. ■ General Problem See page This unit does not operate properly.
Problem Surround sound effects are insubstantial. Digital audio signals cannot be played back. (q DIGITAL indicator does not light up in the front panel display.) There is noise interference when a subwoofer is not connected to this unit. Cause Remedy See page The listening room is not a regular shape. Install this unit in a square or rectangular shaped room. — There is no wall in the path of the sound beam. Try placing a flat object, such as a board, in the path of the sound beam.
Cause Remedy INTRODUCTION Status message See page The signal is too weak. Adjust the orientation of the antenna of the SiriusConnect tuner. Use the “Antenna Level” information on the front panel display to check the antenna reception level. — UPDATE The SiriusConnect tuner is updating the channel list. Wait until the updating is complete. — The period of the subscription is end. Contact SIRIUS Satellite Radio to renew the subscription.
Problem Cause Remedy See page Suddenly this unit produces sounds even though an iPod or iPhone is not connected. This unit is connected to another device. Change the group ID of this unit. 39 The iPod/iPhone interlock function does not work. “iPod Interlock” is set to “OFF”. Set “iPod Interlock” to “ON”.
■ Dolby TrueHD Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With 3 front channels (left, center, and right) and 2 surround stereo channels, Dolby Digital provides 5 full-range audio channels. With an additional channel especially for bass effects, called LFE (low-frequency effect), the system has a total of 5.1-channels (LFE is counted as 0.1-channel).
for the optical disc players and AV receivers/amplifiers of the future, DTS-HD Master Audio also remains fully compatible with the existing multichannel audio systems that incorporate DTS Digital Surround. ■ HDMI HDMI (High-Definition Multimedia Interface) is the first industrysupported, uncompressed, all-digital audio/video interface.
INTRODUCTION List of remote control codes TV DUMONT DURABRAND DUX D-VISION DWIN DYNAMIC DYNATECH DYNATRON DYNEX ECE ELBE 00201, 15401, 16301 16801, 17601, 18201 15701, 16201 15701, 16201 09201, 10101 14801 15401 15701, 16201 15701 00401 03501, 15001, 15701, 16201 ELBIT 14701 ELECS 14701 ELECTRATUNE 15401 ELECTRO TECH 14801 ELECTROBAND 00001 ELECTROHOME 15401, 16301, 17901, 19001 ELECTRONIKA 14701 ELEKTA 14801, 15701, 16201 ELEKTRA 18601 ELEKTRONIKA 14701 ELG 15701, 16201 ELIN 00401, 06901, 14701, 14801,
FORTRESS FRABA FRIAC FRONTECH 01301, 15401 15701, 16201 15701, 16201 02201, 03301, 03701, 14801, 16101 FUJITSU 08701, 10401, 15401, 15701, 16201 FUJITSU GENERAL 15001 FUNAI 02501, 02701, 03701, 14801, 15401, 17201, 17701, 18201 FUTURE 15701, 16201 FUTURETECH 02701 GALAXI 15701, 16201 GALAXIS 15701, 16201 GALERIA 14801 GATEWAY 13301, 13401 GBC 14801, 15901 GE 00301, 00501, 00601, 01201, 02601, 02701, 05601, 07101, 11801, 12201, 12601, 15801, 16301, 16401, 16601, 17301, 17401, 17901, 18401, 18701, 19001, 191
PYMI QUASAR SAMSUX SAMTRON SANKY SANSEI SANSUI 15401, 17901 16701 15401 05601 05801, 14701, 14801, 15401, 15701, 16201, 16801 SANYO 01401, 02001, 02701, 02901, 04301, 10201, 14801, 15301, 15701, 16201, 16301, 18901 SAVE 15701, 16201 SBR 00401, 14701, 15701, 16201 SCEPTRE 20201 SCHAUB LORENZ 04601, 15901, 16101 SCHNEIDER 00401, 03301, 04801, 08501, 14701, 14801, 15001, 15301, 15501, 15601, 15701, 15801, 16101, 16201 SCOTCH 02601, 16301, 17901 SCOTT 02601, 02701, 03101, 15401, 16301, 17901 SEARS 00501, 0080
15701, 15901, 16201 SOUNDESIGN 02601, 02701, 15401, 16301, 17801, 17901 SOUNDMASTER 14801 SOUNDWAVE 00401, 05201, 15701, 16201 SOWA 00601, 00901, 01201, 02101, 02601 SPECTRICIAN 14701, 15401 SQUAREVIEW 02501, 18201 SSS 02701, 16301 STANDARD 00101, 14801, 15701, 15901, 16201 STARLITE 02701, 14801, 15701, 16201 STARLUX 14801 STERN 02201, 03501, 15001, 15301 STRATO 15701, 16201 SUNIC LINE 15701, 16201 SUNKAI 15701, 16201 SUNSTAR 14801, 15701, 16201 SUNWOOD 14701, 14801, 15701, 16201 SUPERSCAN 17201 SUPERTEC 14
01307 00907 00307 00707 00207 00807 00607 01007, 01107 00507 01207 00407 00007, 00107 DVD RECORDER PHILIPS VICTOR YAMAHA 00806 01406 00706 VCR ADMIRAL ADVENTURA AIKO AIWA APPENDIX 01102 00002 02102 00002, 00402, 02202, 02602, 02702 AKAI 00602, 02302, 04902, 05902, 06602 AKIBA 01402 ALBA 01402, 02102, 02302, 02702 AMERICA ACTION LOEWE OPTA 04602 LOGIK 01402, 02002 LUXOR 00802, 01102, 01602, 04902 LXI 00402, 05702, 05902 M ELECTRONIC 00002, 04702 MAGNASONIC 04302 MAGNAVOX 00002, 00302, 00502, 01502, 056
PENTAX 00702, 05402, 06202, 06502 PERDIO 00002, 04702 PHILCO 00302, 05602, 06402 PHILIPS 00302, 01502, 03202, 03902, 04002, 04602, 06402 PHONOLA 01502 PILOT 00402, 05702 PIONEER 00702, 01302, 01502, 05802, 06002, 06202, 06702 POLK AUDIO 01502 PROFITRONIC 02002 PROLINE 00002, 04702 PROSCAN 01202, 03802, 05602 PROTEC 01402 PULSAR 00502 PYE 01502 QUARTER 06102 QUARTZ 06102 QUASAR 00302, 03702, 05602, 06402 QUELLE 01502, 04602, 04802, 05002 RADIO SHACK 05502, 05602, 05702, 05902, 06102, 06302, 06402 RADIOLA 01
WISI XSAT ZEHNDER ZENITH 00604, 01304, 01404 00104 04004 03304 INTRODUCTION PREPARATION PLAYBACK FEATURES SETTINGS APPENDIX 02304, 05104, 06904 03404, 05304 03604 02604 00104, 00604, 00704, 01004, 01804, 05604 KREISELMEYER 00604 LABGEAR 06304 LOGIX 03804 LORENZEN 01104 MAGNAVOX 02004, 02204 MANHATTAN 01404, 03804, 04204 MARANTZ 00704 MEDIASAT 03104 MEMOREX 02204 METRONIC 00004 MITSUBISHI 02304 MOTOROLA 03504 MYRYAD 00704 NEXT LEVEL 03504 NOKIA 01404, 02104, 02404, 04904, 05704, 06804 OCTALTV 03704 ORBITE
Index ■ Numerics 2-channel source surround decode ............................... 24 3Beam, beam mode ...................................................... 24 5.1ch beam mode .......................................................... 23 5.1-channel source 7.1-channel decode ........................ 24 5Beam, beam mode ...................................................... 23 5BeamPlus2, beam mode ............................................. 24 7.1ch beam mode ............................................
■ N ■ O Operation range, remote control .................................. 14 OPTION key, Remote control ....................................... 9 OSD BACK COLOR, OSD setup ............................... 40 OSD background color, OSD setup ............................ 40 OSD language change ................................................. 15 OSD SETUP, DISPLAY MENU ................................ 40 OSD setup, DISPLAY MENU .................................... 40 OSD SHIFT, OSD setup ..................
© 2009 Yamaha Corporation All rights reserved.
