User Manual

01V96i Editor—Owner’s Manual

Getting StartedKeyboard ShortcutsIndex Windows

 Remote Channels

When you select the REMOTE LAYER button in the Master window, Remote Channels

are displayed.

1 Channel number

This is the channel number. Double-click the channel number to open the Selected

Channel window.

2 [SELECT] button

This button is used to select the Remote Channel.

3 [ON] button

This button turns the Remote Channel on and off. It appears orange while the chan-

nel is on.

4 Remote target name

This name indicates the remote target assigned on the 01V96i.

5 Channel fader

This is the Bus Out’s fader.

6 Fader value indicator

This indicator indicates the fader position in the range of 0 through 127.

If the remote target is set to User Assignable Layer:

In this case, the assigned channels are displayed. For more information, refer to “Input

Channels” on page 8 and “Output Channels” on page 12. If the Group Master Fader is

assigned, only the [SOLO], and [ON] buttons and channel faders are displayed.

Note: When the remote target setting on the 01V96i is set to User Defined, you can use

the [ON] buttons and channel faders to control the functions specified on the Remote page.

Note: When the remote target setting on the 01V96i is set to User Defined, you can use

the [ON] buttons and channel faders to control the functions specified on the Remote page.