User Manual

Using 01V96 Editor

Windows

Getting StartedKeyboard ShortcutsIndex

01V96i Editor—Owner’s Manual

Windows

Selected Channel Window

The Selected Channel window allows detailed editing of the currently selected channel. To open the

Selected Channel window, choose [Selected Channel] from the [Windows] menu.

There are five variations of the layout of the Selected Channel window, as follows:

• Input Channels (see below)

• Stereo Input Channels (see page 16)

• Bus Outs (see page 17)

• Aux Sends (see page 18)

•Stereo Outs (see page 19)

 Input Channels

1 CHANNEL SELECT, INPUT PATCH & LIBRARY section

Channels can be selected by clicking the Channel ID and selecting from the list that appears, or by

clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-

nel ID. To edit the name, click it and type. The INPUT PATCH parameter is used to select an input

source. To select an input, click the parameter and choose from the list that appears. The [LIBRARY]

button opens the Channel Library window.

2 GATE section

This section contains the Gate controls and display graph for the currently selected Input Channel.

The rotary controls are used to set the threshold, range, attack, decay, and hold. The GR meter indi-

cates the amount of gain reduction being applied by the Gate. The OUT meter indicates its output

level. The [ON] button turns the Gate on and off. The [LINK] button links the Gate of the currently

selected Input Channel with the Gate of its partner channel. The KEY IN parameter is used to select a

Gate trigger source. The [LIBRARY] button opens the Gate Library window.

Note: You can open multiple Selected Channel windows by choosing [Windows] menu ->

[Selected Channel] -> [Additional View]. The titles of these windows will indicate [Locked].

You cannot open Library windows from windows that are indicated as [Locked]. In addition,

these windows will not reflect the following operations:

• Channel selections made in the Layer window (via the SELECT button)

• Edits in the Surround Editor window

12 43 5 6

7 8 9