User Manual

Using 01V96 Editor

Windows

Getting StartedKeyboard ShortcutsIndex

01V96i Editor—Owner’s Manual

Windows

Effect Editor Window

The Effect Editor window enables you to edit the internal effects processors. To open the Effect Editor

window, choose [Effect Editor] from the [Windows] menu.

1 Effects processor select

These buttons are used to select the internal effects processors.

2 Effect select section

The EFFECT NAME, TYPE, and IN/OUT are the name, type and I/O configuration of the effect

recalled to the currently selected effects processor. To edit the EFFECT NAME, click it and type. The

[LIBRARY] button opens the Effects Library window.

3 [IN] button

This button is used to set the metering position to the effects processor’s inputs.

4 [OUT] button

This button is used to set the metering position to the effects processor’s outputs.

5 Meters

These are input or output meters for the currently selected effects processor.

6 Effect parameter section

This section contains the various effects controls, buttons, and displays. Its layout depends on the

selected effect type.

7 [MIX BALANCE] control

This control enables you to adjust the balance between the wet and dry signals. When set to 0, only the

dry signal is heard. When set to 100, only the wet signal is heard.

8 [BYPASS] button

This button is used to bypass the currently selected effects processor.

Note: You can open multiple Effect Editor windows by choosing [Windows] menu -> [Effect Editor] and mak-

ing a choice other than [Generic Editor]. The titles of these windows will indicate [Locked]. You cannot open

Library windows from windows that are indicated as [Locked].

When you recall effects, windows that do not indicate “Locked” in the title will be recalled.

1 2 53 4

6 7 8