User Manual

01V96i Editor Installation Guide 3
The 01V96i Editor enables you to prepare the 01V96i mixing console settings beforehand by editing the
parameters offline, and also remotely monitor/control the 01V96i online.
For subsequent operations, refer to the PDF manual from the [HELP] menu in each software program.
Minimum System Requirements
Keep in mind that the software is often updated and the system requirements are subject to change. You can
check the latest version information of each program and its system requirements at the following website
http://www.yamahaproaudio.com/
The system requirements may differ slightly depending on the particular computer.
Installing software
To use 01V96i Editor, you’ll need to install the following software programs. Follow the appropriate instructions
below.
Studio Manager Installation
Studio Manager is a cross-platform application that enables you to use multiple Editor programs for remotely
controlling Yamaha hardware from your computer, and allows you to save the Editor settings for instant recall.
For specific instructions on using the software, refer to the PDF manual from the [HELP] menu in the Studio
Manager and each Editor.
01V96i Editor
Installing the Software
Procedures
1
Verify that your system meets the operating requirements of each software program. page 3
2
Install the Studio Manager and each Editor. page 3
3
Install the appropriate driver to your computer. page 4
4
Start up the Studio Manager, then start up the Editor. page 6
Software installation
• Studio Manger
• 01V96i Editor
• Yamaha Steinberg USB Driver
You can download the latest version of Studio Manager at the following website. For specific installation instructions, refer to
the installation guide included in the downloaded file.
http://www.yamahaproaudio.com/