User`s manual

AVY16-ES User’s Manual AuviTran 6
10- TECHNICAL SPECIFICATIONS OF THE BOARD
GENERAL
Size 120 mm x 160 mm x 40mm (mini-YGDAI format)
Power Consumption 4 Watts
Power Supply +5 V, GND (from mini-YGDAI slot)
Storage : Temp/Humidity (non-
condensing)
-5°C to 70°C / 0% to 95%
Operating : Temp/Humidity (non-
condensing)
0°C to 50°C / 5% to 90%
Connectors 1 mini YGDAI mini backplane connector, 2 Neutrik®
EtherCon® RJ45-XLR female connectors (EtherSound™
from/to links),
1 Sub-D9 (RS232) serial interface
AUDIO I/O
Outputs 16 x or 8x extracted from any of the 2x64
EtherSound™ channels @ 44.1 kHz or 48kHz
Inputs 16x or 8x inserted to any of the 2x64 EtherSound™
channels @ 44.1 kHz or 48kHz
AUDIO SPECIFICATIONS
Synchronisation PLL locking range 44.1 kHz to 48 kHz ± 10%
Audio Format 24 bit
SYNCHRONIZATION
External clock synchronisation Automatic from EtherSound™ network at 48 kHz or
44.1 kHz or manually from mini-YGDAI standard tools
configuration
OTHER I/O
RS232 serial interface 9-pin D-Sub
DEVELOPMENT AND INTEGRATION ENVIRONMENT
OS Supported Windows 2000/XP and Linux
ESMonitor AuviTran’s ESMonitor is a Windows XP application which
can run on a remote PC and can control and monitor all
AVY16-ES information and parameters.
11- PLUGGING THE BOARD
Please visit AuviTran’s website to make sure the board you wish to install is fully
compatible with your Yamaha equipment.
http://www.AuviTran.com
The card contains sensitive electric components, which can be easily damaged by static
electricity, so the card should be left in its original packing until it is installed.
1. Switch off and unplug your device.
2. Remove the two fixing screws and the protection plate as shown below. Make sure
you keep the protection plate and the fixing screws in a safe place for further use.