ST/PRO Owner’s manual Mode d’emploi Bedienungsanleitung Manual del propietario Manuale d’uso e manutenzione EN FR DE ES IT
SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated on the safety instruction section.
IMPORTANT SAFETY INSTRUCTIONS WARNING — When using any electrical or electronic product, basic precautions should always be followed. These precautions include, but are not limited to, the following: 1. 2. 3. 4. 5. 6. 7. Read these instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug.
COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party Address Telephone Fax Type of Equipment Model Name : Yamaha Corporation of America : 6600 Orangethorpe Avenue, Buena Park, CA 90620 USA : 1-714-522-9011 : 1-714-522-9301 : Player Piano : DGB1KENST, DGN1ENST, DGB1KENCL, DGN1ENCL, DGC1ENST, DGC2ENST, DC1XENST, DC2XENST, DC3XENST, DC3XENPRO, DC5XENPRO, DC6XENPRO, DC7XENPRO, DS4ENPRO, DS6ENPRO, DS3XENPRO, DS5XENPRO, DS6XENPRO, DS7XENPRO, DCF4ENPRO, DCF6ENPRO, DCFXENPRO, DU
Information for Users on Collection and Disposal of Old Equipment This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC.
Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos electrónicos y eléctricos usados no deben ser mezclados con desechos hogareños corrientes. Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de recolección aplicables, de acuerdo a su legislación nacional y las directivas 2002/96/EC.
English ST/PRO Owner’s manual
Welcome to the Yamaha DisklavierTM! Thank you for purchasing the Yamaha Disklavier! The Disklavier is a fascinating instrument that integrates a classic Yamaha acoustic piano with innovative electronics to suit your entertainment, educational, and creative needs, while retaining the tone, touch and long-term value that have long made Yamaha pianos the world’s finest. English Before using your Disklavier piano, please read this manual thoroughly and retain it for future reference.
Important Precautions Read the following before operating the Disklavier. Warnings • Do not locate the Disklavier in a place subject to excessive heat, low temperatures, or direct sunlight. This could be a fire hazard and may damage the finish and internal parts. • Excessive humidity or dust can lead to fire or electric shock. • Connect the plug on the Disklavier power cable to a compatible AC outlet. Failure to do so will present a fire and electric shock hazard.
Table of Contents Chapter 1 Introduction Features .................................................................1 Items Supplied with the Disklavier .........................1 English Names of Parts and Their Functions......................2 Compatible Media and File Format ........................7 Basic Disklavier Terminology .................................8 Chapter 2 Getting Started Connecting the AC Power Cable ...........................9 Turning the Power On/Off ...............................
Chapter 1 Introduction Features The Disklavier ENSPIRE offers many valuable features that open up new musical possibilities for you to explore. Here are brief explanations of such features: Automatic performance from a real acoustic piano • Non-contact optical sensors detect the movement of the keys with a high level of fidelity, recording and reproducing the most delicate nuances of any piano performance.
Chapter Introduction 1 Names of Parts and Their Functions Switch Box (Front and Bottom Panel) Front panel 5 6 7 9 2 3 English 8 Bottom panel 1 4 1 POWER button Turns the Disklavier on or off. 5 USB port Used to connect the USB flash memory. VOLUME +/– buttons For adjusting the volume. Note: The unit cannot detect the USB flash memory if two or more memory devices are connected at the same time. 2 PLAY/PAUSE button For starting and pauses playback.
Chapter 1 Introduction Switch Box (Rear Panel) 1 2 AUTO PLAY switch For activating or deactivating the auto play function. If you leave the switch set to “ON,” playback automatically starts when the power is turned on. 1 AUTO OFF MODE switch For activating or deactivating the auto power-off function. Set this switch to ON to turn the power off automatically if you do not use the Disklavier for the time specified with the ENSPIRE Controller app.
Chapter Introduction 1 Control Center Unit (for Grand Pianos) 6 English 1 2 3 4 5 7 USB (To DEVICE) port Used to connect the USB flash memory. 1 Note: The unit cannot detect the USB flash memory if two or more memory devices are connected at the same time. LAN port Used to connect the router or hub using an Ethernet cable. 2 DIGITAL OUT jack Used to connect to the digital input jack of an external audio device using a digital coaxial cable.
Chapter 1 Introduction Inlet Box (for Upright Pianos) 1 Main switch Turns on or off the main power. 1 OUTPUT jacks Used to connect optional monitor speakers. 2 3 4 5 LAN port Used to connect the router or hub using an Ethernet cable. 4 2 3 OMNI IN/OUT jacks Used to connect to the input or output jacks of external audio devices using RCA cables. 5 5 USB (To HOST) port Used to connect the computer using a USB cable.
Chapter Introduction 1 Monitor Speaker (for Grand Pianos)* English LOW 1 HIGH 1 2 LINE 2 3 LOW/HIGH volume controls For adjusting the bass/treble sound volume. LINE 1/2 volume controls For adjusting the sound volume of each line input. Power indicator Lights up while the speaker is turned on. Note: For normal use, turn down the LINE 2 volume completely, and turn up the LINE 1 volume to the three o’clock position. 1 2 3 * Not supplied on some models.
Chapter 1 Introduction Compatible Media and File Format Compatible Device USB Flash Memory • The USB flash memory should be formatted in FAT16 or FAT32 file system. • Check that the USB flash memory is free of memory and software protection before attempting to use it, as these kinds of protection will prohibit access to the memory. • The Disklavier is USB 2.0 compliant. You can also connect USB 3.0 devices, however data will be transferred at USB 2.0 speeds.
Chapter Introduction 1 Basic Disklavier Terminology The following is a list of several basic Disklavier words that you may need to know before proceeding with operational procedures in this manual. For additional Disklavier terminology, see the glossary provided in Chapter 5. An ensemble song contains the same left- and right-hand parts as an L/R song, and extra tracks that are played by the internal XG tone generator. Accompanying tracks can include acoustic bass, drums, strings, vibes, etc.
Chapter 2 Getting Started Connecting the AC Power Cable 1 Connect the AC power cable extending from the piano to the AC wall outlet. Warning: Use the AC power cable attached to the piano. Use of other AC power cables may result in damage, overheating, or fire. Caution: • Do not stretch the cable or bend its ends. • Do not attempt to use the cable if it is stretched or if the ends of the cable have been bent. Attempting to do so may cause interruptions to the power supply.
Chapter Getting Started 2 Turning the Power On/Off Turning the Power On 1 Make sure that the main switch on the power supply unit/ inlet box is turned on. English (Grand piano) Power supply unit (located underneath the piano) ON OFF MAINS (Upright piano) ON OFF MAINS Inlet box (located on the rear) 2 Press the POWER The POWER button. indicator flashes slowly (every one second). Flashing slowly After several seconds, the POWER Your Disklavier is now ready for use. indicator lights up.
Chapter 2 Getting Started Turning the Power Off (Standby) 1 Press the POWER The POWER button. indicator flashes (every 0.5 seconds). Flashing After several seconds, the POWER indicator lights up dimly. Setting the Auto Power-off Function You can turn the power off automatically if you do not use the Disklavier for the time specified with the ENSPIRE Controller app. 1 11 Set the AUTO OFF MODE switch on the rear of the switch box.
Chapter Getting Started 2 Connecting the Disklavier and Smart Device to a Network By connecting your Disklavier and smart device to a network, you can enjoy a variety of features through the Internet Direct Connection (IDC) services or control the Disklavier using your smart device (ENSPIRE Controller app). Internet Direct Connection (IDC) is a feature that allows you to connect your Disklavier directly to the Internet.
Chapter 2 Getting Started Choosing the Network Connection Method You can use one of the three methods of connections below. Select one which is most suitable for your network environment. Wireless Network Connection by WPS ( page 15) Choose this if you have a wireless router (access point) that supports WPS. Connection will be established via a wireless router (access point).
Chapter Getting Started 2 Wired Network Connection ( page 17) Choose this if you have a wireless router (access point) that does not support WPS. Connection will be established via wireless router (access point). Wireless router er (access point) Note: Use an STP (shielded twisted pair) cable for connection.
Chapter 2 Getting Started Wireless Network Connection by WPS If your wireless router (access point) supports WPS, you can easily connect the Disklavier to a network just by following the procedures below, without making any additional settings, such as entering a password. 1 2 Press the POWER button to turn the power off. Connect the USB wireless LAN adaptor (UD-WL01) to the USB port on the rear of the switch box.
Chapter Getting Started 6 Press the WPS button on your wireless router (access point) within two minutes after step 5. 2 Note: For details on the WPS setting, refer to the owner’s manual supplied with your wireless router (access point). When the Disklavier is successfully connected to the wireless router (access point), the LED lamp on the USB wireless LAN adaptor (UD-WL01) lights up. 7 Open the Wi-Fi setting screen on your smart device. 8 Enable the Wi-Fi function.
Chapter 2 Getting Started Wired Network Connection If your wireless router (access point) does not support WPS, you can connect the Disklavier to a wireless router (access point) using an Ethernet cable. 1 2 Press the POWER button to turn the power off. (For grand pianos) Connect the wireless router (access point) to the LAN port on the control center unit using an Ethernet cable.
Chapter Getting Started 4 Press the POWER 2 button to turn the power on. Connection between the Disklavier and the wireless router (access point) is automatically established in approximately 15 to 20 seconds. Open the Wi-Fi setting screen on your smart device. 6 Enable the Wi-Fi function. 7 Note: For details on the Wi-Fi setting, refer to the owner’s manual supplied with your smart device.
Chapter 2 Getting Started 4 Press the POWER button to turn the power on. When the Disklavier is set as an access point, the LED lamp on the USB wireless LAN adaptor (UD-WL01) lights up. Now your Disklavier is available as an access point. 5 Open the Wi-Fi setting screen on your smart device. 6 Enable the Wi-Fi function. 7 From the network list shown on the screen, tap on [DKV**********]. Note: For details on the Wi-Fi setting, refer to the owner’s manual supplied with your smart device.
Chapter 3 Other Settings Updating the Disklavier 1 Download the update program file. You can download the update program from the following site: http://download.yamaha.com/ 2 3 4 Copy “en_update.bin” included in the downloaded file to the root directory of the USB flash memory. Press the POWER Note: • To update your Disklavier, you will need a USB flash memory with 2GB or more of free space. • You can also update your Disklavier using the ENSPIRE Controller app.
Chapter 3 Other Settings Initializing Network Settings If the ENSPIRE Controller app cannot connect to your Disklavier due to the improper network settings, follow the procedure below to initialize network settings on your Disklavier. 1 2 Press the POWER button to turn the power off. Holding the VOLUME +/– buttons, press the POWER button. + After the unit is turned on, restart the ENSPIRE Controller app.
Chapter 4 Troubleshooting If you are having difficulty operating the Disklavier, see if any of the symptoms listed below apply to your problem and follow the recommended remedy. Power Remedy Make sure that the main switch on the power supply unit is turned on. Make sure that the AC power cable is securely connected to a suitable AC wall outlet. If the Disklavier still cannot be turned on, disconnect it from the AC wall outlet, and consult your Disklavier dealer.
Chapter 4 Troubleshooting Network Symptom The Disklavier cannot connect to the Internet via a wireless router (access point). Wireless network is not found. The ENSPIRE Controller app does not detect the Disklavier. 23 Remedy Make sure that the wireless router (access point) is turned on. The Disklavier and the wireless router (access point) might be too far apart. Place the Disklavier and the wireless router (access point) closer to each other.
Chapter Troubleshooting 4 Error Indications The error indicator may flash in red when some error has occurred. Refer to the table below for an explanation of the indication. Example of Indication: Lighting up Indication English Flashing Situation Firmware update is failed. Remedy Turn the power off. Download the update program and try to update the firmware again. If the problem still persists, consult your Yamaha piano dealer. Two or more USB flash memories are connected at the same time.
Chapter 5 Glossary This glossary provides basic definitions of terms used frequently in Disklavier manuals. DHCP LAN This is a standard or protocol by which IP addresses and other low-level network configuration information can be dynamically and automatically assigned each time a connection is made to the Internet. Short for Local Area Network, this is a data-transfer network that connects a group of computers at a single location (such as an office or home) by means of a special cable.
Chapter Glossary XG Abbreviation for Standard MIDI File. Yamaha XG is an extension of the GM (General MIDI) format. Its greater polyphony, more voices, and use of effects enhances the compatibility between MIDI devices. When a song in the Yamaha XG format is played on another XGcompatible tone generator or synthesizer, it plays and sounds as the original composer/creator intended. SMF Song Format A song file format supported by MIDI sequencers and music software.
Chapter 6 Specifications General Specifications Type ST Piano Grand Piano Sensor System Drive System Upright Piano Grand Piano Key Sensors Non-contact optical fiber grayscale shutter sensing system for 88 keys (sensors for the key position, keying velocity, and key releasing velocity) Hammer Sensors Non-contact optical fiber/shutter sensing system*1 Non-contact optical fiber/ grayscale sensing system Pedal Sensors Damper & shift pedals: Non-contact optical positionsensing system Sostenuto p
Chapter Specifications Type ST Piano Grand Piano PRO Upright Piano Piano Sound CFX Binaural Sampling, CFX Stereo Sampling Pitch Control 414.8 Hz to 466.8 Hz (tunable in 0.2 Hz increments) Grand Piano Polyphony 256 notes (max.
ST/PRO Appendix Appendix
XG Voice List Voice Group Piano LSB 0 1 18 40 41 0 1 0 1 32 40 41 0 1 0 1 18 32 40 45 64 0 1 32 33 34 40 41 42 45 0 1 25 35 0 1 27 64 65 0 0 0 64 0 1 45 0 1 64 97 98 0 0 96 97 0 35 96 97 0 32 33 34 35 36 37 38 40 64 65 66 67 0 24 32 33 PRG 1 1 1 1 1 2 2 3 3 3 3 3 4 4 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 7 7 7 7 8 8 8 8 8 9 10 11 11 12 12 12 13 13 13 13 13 14 15 15 15 16 16 16 16 17 17 17 17 17 17 17 17 17 17 17 17 17 18 18 18 18 Element 2* 1 2 2 2 2 1 2 2 2 2 2 2 2 2 1 2 2 2 2 1 2 1 2 2 2 2 2 2 2 1 1 2 2 1 1
XG Voice List Voice Group Bass Strings Ensemble Brass A-2 Voice Name TechnoBass Orbiter SquareBass RubberBass Hammer SynthBass2 MellowSyBass SequenceBass ClickSynBass SynBass2Dark SmoothSyBass ModulrSyBass DXBass XWireBass Violin SlwAtkViolin Viola Cello Contrabass Trem.Strings SlwAtTremStr SuspenseStr PizzicatoStr Orch.Harp YangChin Timpani Strings1 StereoStrngs SlwAtkStrngs ArcoStrings 60’sStrings Orchestra Orchestra2 TremOrchstra Velo.Strings Strings2 S.
XG Voice List Voice Group Synth. Pad Synth.
XG Drum Kit List : Same as Standard Kit 1 : No Sound Bank Select MSB (0-127) 127 127 127 127 127 Bank Select LSB (0-127) 0 0 0 0 0 Program Change (0-127) 0 1 8 16 24 Program Change (1-128) 1 2 9 17 25 MIDI Alternate Key Off Standard Kit1 Standard Kit2 Room Kit Rock Kit Electro Kit Group Note # Note 13 C#-1 3 Surdo Mute 14 D-1 3 Surdo Open 15 D#-1 Hi Q 16 E-1 Whip Slap 17 F-1 4 Scratch H 18 F#-1 4 Scratch L 19 G-1 Finger Snap 20 G#-1 Click Noise 21 A-1 Metronome Click 22 A#-1 Metronome Bell 23 B-1 Seq Click
XG Drum Kit List : Same as Standard Kit 1 : No Sound 126 0 1 2 SFX Kit2 Phone Call Door Squeak Door Slam Scratch Cut Scratch H 3 Wind Chime Telephone Ring 2 XG Drum Kit List Car Engine Ignition Car Tires Squeal Car Passing Car Crash Siren Train Jet Plane Starship Burst Roller Coaster Submarine Appendix Bank Select MSB (0-127) 127 127 127 127 126 Bank Select LSB (0-127) 0 0 0 0 0 Program Change (0-127) 27 32 40 48 0 Program Change (1-128) 28 33 41 49 1 MIDI Alternate Key Off Dance Kit Jazz Kit Brush Ki
MIDI Data Format MIDI Channel Message (1) Status byte MIDI Events Key Off [GM1] [GM2] Key On [GM1] [GM2] Control Change Mode Message Status 1st Data byte Data 8nH (n: Channel Number) kk 9nH (n: Channel Number) kk BnH BnH 0 (n: Channel Number) Parameter vv Key Number (0-127) vv Bank Select MSB [GM2] 1 (01H) 5 (05H) Modulation [GM1] [GM2] Portamento Time [GM2] Data Entry MSB [GM2] Main Volume [GM1] [GM2] Panpot [GM1] [GM2] Expression [GM1] [GM2] Bank Select LSB [GM2] Data Entry LSB [GM2
MIDI Data Format MIDI Channel Message (2) ■ Parameters Controlled by NRPN (Non-Registered Parameter Numbers) NRPN Data Entry MSB LSB MSB LSB 01H 01H 01H 01H 01H 01H 01H 01H 01H 01H 01H 01H 14H 08H 09H 0AH 20H 21H 30H 31H 34H 35H 63H 64H 66H rrH mmH mmH mmH mmH mmH mmH mmH mmH mmH mmH mmH mmH mmH — — — — — — — — — — — — — Parameter Vibrato Rate Vibrato Depth Vibrato Delay Low Pass Filter Cutoff Frequency Low Pass Filter Resonance EQ BASS EQ TREBLE EQ BASS Frequency EQ TREBLE Frequency EG Attack Ti
MIDI Data Format MIDI Parameter Change Table ■ MIDI Parameter Change Table (XG SYSTEM) Address (H) 00 00 Size (H) Data (H) 00 4 00-0F 00-0F 00-0F 00-0F MASTER TUNE 04 05 06 7D 7E 7F 1 1 1 1 1 1 07 00-7F 00-7F 28-58 N 00 00 MASTER VOLUME MASTER ATTENUATOR TRANSPOSE DRUM SETUP RESET XG SYSTEM ON ALL PARAMETER RESET TOTAL SIZE Parameter XG Default (H) Description -102.4…0…+102.
MIDI Data Format Address (H) 02 01 Data (H) Parameter 20 2 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 1 1 1 1 1 1 1 1 1 1 1 1 1 0F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 01-7F 00-7F CHORUS TYPE MSB CHORUS TYPE LSB CHORUS PARAMETER 1 CHORUS PARAMETER 2 CHORUS PARAMETER 3 CHORUS PARAMETER 4 CHORUS PARAMETER 5 CHORUS PARAMETER 6 CHORUS PARAMETER 7 CHORUS PARAMETER 8 CHORUS PARAMETER 9 CHORUS PARAMETER 10 CHORUS RETURN CHORUS PAN SEND CHORUS TO REVERB Refer to Effec
MIDI Data Format ■ MIDI Parameter Change Table (MULTI EQ) Address (H) 02 40 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 TOTAL SIZE Size (H) Data (H) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 15 00-04 34-4C 04-28 01-78 00-01 34-4C 0E-36 01-78 34-4C 0E-36 01-78 34-4C 0E-36 01-78 34-4C 1C-3A 01-78 00-01 Parameter EQ TYPE EQ GAIN1 EQ FREQUENCY1 EQ Q1 EQ SHAPE1 EQ GAIN2 EQ FREQUENCY2 EQ Q2 NOT USED EQ GAIN3 EQ FREQUENCY3 EQ Q3 NOT USED EQ GAIN4 EQ FREQUENCY4 EQ Q4 NOT USED EQ GAIN5 EQ
MIDI Data Format ■ MIDI Parameter Change Table (MULTI PART) Address (H) 08 nn 00 01 02 03 04 05 06 07 08 09 1 1 1 1 1 1 1 1 1 2 00-20 00-7F 00-7F 00-7F 00-0F, 7F 00-01 00-02 00-03 28-58 00-0F 00-0F 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 29 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 28-58 00-
MIDI Data Format Address (H) Data (H) 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F 60 61 62 63 64 65 66 67 68 69 6A 6B 6C 6D 6E 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-5F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-5F 28-58 00-7F 00-7F 00-7F 00-7F 00-7F 00-01 00-7F 00-7F 00-7F 00-7F 00-7F 01-7F 01-7F PAT PITCH CONTROL PAT LOW PASS FILTER CONTROL PAT AMPLITUDE CONTROL PAT LFO PMOD DEPTH PAT LFO FMOD DEPTH PAT LFO AMOD DEPTH AC1 CONTROLLER NUMBER AC1 PITCH
MIDI Data Format ■ MIDI Parameter Change Table (DRUM SETUP) Address (H) 3n rr Size (H) Data (H) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-7F 00-01 00-01 00-01 00-7F 00-7F 00-7F 00-7F 00-7F PITCH COARSE PITCH FINE LEVEL ALTERNATE GROUP PAN REVERB SEND CHORUS SEND VARIATION SEND KEY ASSIGN Rcv NOTE OFF Rcv NOTE ON LOW PASS FILTER CUTOFF FREQUENCY LOW PASS FILTER RESONANCE EG ATTACK RATE EG DECAY1 RATE EG DECAY2 RATE
MIDI Data Format System Exclusive Messages (1) * Not received when Receive System Exclusive Message is set to off. * Not transmitted when Transmit System Exclusive Message is set to off. ■ System Exclusive Messages (Universal Non Realtime Messages) MIDI Event GM1 System On [GM1] [GM2] Data Format F0 7E XN 09 11110000 01111110 0xxxnnnn 00001001 00000001 11110111 01 F0 7E XN 09 01 F7 F7 = Exclusive status = Universal Non-Real Time = When N is received N=0-F, whichever is received.
MIDI Data Format ■ System Exclusive Messages (Preset Voice) MIDI Event Data Format String Resonance Depth F0 Sustain Sample Depth F0 Key Off Sampling Depth F0 Soft Pedal Depth F0 43 73 11110000 01000011 01110011 00000001 01010000 00010001 0000nnnn 00000010 0ddddddd 11110111 43 73 11110000 01000011 01110011 00000001 01010000 00010001 0000nnnn 00000011 0ddddddd 11110111 43 73 11110000 01000011 01110011 00000001 01010000 00010001 0000nnnn 00000100 0ddddddd 11110111 43 73 11110000 01000011 01110011 0
MIDI IMPLEMENTATION CHART Yamaha Disklavier Model: ENSPIRE ST/PRO Date: 01-APR-2016 Version: 1.00 Function...
10-1 Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650 Japan Manual Development Group Copyright © 2016 Yamaha Corporation Published 03/2017 MW-B0 Printed in Japan YH773B0
