User Manual

Advanced Song Playback
English
4
Chapter
39
■ About Song Playback Screen
When the song playback is stopped — with the timer play function is set to
ON and the current time is displayed — “T” flashes to the right side of the
current time.
When there is a blank part created at the beginning of the recorded song,
turning on this function automatically skips the unwanted part and starts
playback from the actual beginning of the song.
Press [SETUP] on the remote control.
The setup menu screen appears.
Select “Playback” with the cursor buttons ([ ] [ ] [ ]
[ ]), then press [ENTER].
Note:
The “Reverb” option appears only
on models equipped with the Silent
Piano™ function.
The playback setting screen appears with the cursor flashing.
Note:
The “KeyMotion” option appears
only on models equipped with the
Silent Piano™ function.
Press [+/YES] and [–/NO] to change setting.
Indicates that the timer play is on.
Skipping the Blank Part at the Beginning of a Song
“Playback”[SETUP]
1
*TimerPlay
*MIDI
*AudioI/O
*M-Tune
=SETUP MENU=
(1/3)
2
*Network *Playback
*Shortcut
=SETUP MENU=
(2/3)

*Reverb
>SkipSpace=OFF
>KeyMotion=ON
=Playback=
-+
3