User Manual
Table Of Contents
- 01_YH773B0_dkven_st_pro_om_en_fr_de_es_it_c1
- 02_1_YH773B0_dkven_st_pro_om_pre
- 02_2_YH773B0_dkven_st_pro_om_frontmatter
- 03_YH773B0_dkven_st_pro_om_en_body
- 04_YH773B0_dkven_st_pro_om_appendix
- dkven_st_pro_om_en_YH773A0 39
- dkven_st_pro_om_en_YH773A0 40
- dkven_st_pro_om_en_YH773A0 41
- dkven_st_pro_om_en_YH773A0 42
- dkven_st_pro_om_en_YH773A0 43
- dkven_st_pro_om_en_YH773A0 44
- dkven_st_pro_om_en_YH773A0 45
- dkven_st_pro_om_en_YH773A0 46
- dkven_st_pro_om_en_YH773A0 47
- dkven_st_pro_om_en_YH773A0 48
- dkven_st_pro_om_en_YH773A0 49
- dkven_st_pro_om_en_YH773A0 50
- dkven_st_pro_om_en_YH773A0 51
- dkven_st_pro_om_en_YH773A0 52
- dkven_st_pro_om_en_YH773A0 53
- dkven_st_pro_om_en_YH773A0 54
- dkven_st_pro_om_en_YH773A0 55
- 05_YH773B0_dkven_st_pro_om_en_fr_de_es_it_c4
Troubleshooting
4
Chapter
23
Network
Symptom Remedy
The Disklavier cannot connect to the Internet via a
wireless router (access point).
Make sure that the wireless router (access point) is
turned on.
The Disklavier and the wireless router (access point)
might be too far apart. Place the Disklavier and the
wireless router (access point) closer to each other.
There might be an obstacle between the Disklavier and
the wireless router (access point). Move the wireless
router (access point) to a location where there are no
obstacles between them.
If you connect the Disklavier and the wireless router
(access point) using an Ethernet cable, enable the
DHCP server function on your wireless router (access
point).
Wireless network is not found. Microwave ovens or other wireless devices in your
network area might disturb the wireless communication.
Turn off these devices.
Access to the network is restricted by the firewall
settings of the wireless router (access point). Check the
firewall setting of the wireless router (access point).
The ENSPIRE Controller app does not detect the
Disklavier.
The Disklavier and smart device are not on the same
network. Check the network connections and settings
on the wireless router (access point), and then connect
the Disklavier and smart device to the same network.