User Manual

Table Of Contents
Introduction
1
Chapter
3
AUTO PLAY switch
For activating or deactivating the auto play function.
If you leave the switch set to “ON,” playback
automatically starts when the power is turned on.
AUTO OFF MODE switch
For activating or deactivating the auto power-off
function. Set this switch to ON to turn the power off
automatically if you do not use the Disklavier for the
time specified with the ENSPIRE Controller app.
Note:
When set to ON, the Disklavier automatically turns off under the
following conditions (for the specified time):
No operation has been performed on the switch box.
No operation has been performed on the ENSPIRE Controller
app.
The keyboard has not been played.
The Disklavier has not received the MIDI data.
MAINTENANCE button
For service personnel only. Do not touch this
button.
USB port
Used to connect the USB wireless LAN adaptor
(UD-WL01).
Note:
The unit cannot detect the USB flash memory if two or more
memory devices are connected at the same time.
WLAN switch
For setting the method for wireless LAN connection
when connecting the USB wireless LAN adaptor to
the USB port. See “Connecting the Disklavier and
Smart Device to a Network” on page 12.
Switch Box (Rear Panel)
134 52
1
2
3
4
5