manual

Media Management
English
11
Chapter
101
Note:
Copy-protected files, such as
PianoSoft and PianoSoft·Plus songs,
cannot be copied to the [FromToPC]
folder.
You can copy song files from a Windows or Macintosh computer to a
special folder on the Disklavier control unit called [FromToPC] and then
play them on the Disklavier.
Note:
Do not copy the files other than
Disklavier song files.
Note:
Do not access the [FromToPC]
folder while Disklavier control unit
is engaged in another operation
(such as file copying or deleting).
Connect the Disklavier control unit to a LAN (local area
network) to which a personal computer with a song file is
also connected.
Note:
It is necessary to configure the
Disklavier control unit properly for
network communications by
enabling it to get a DHCP IP address
automatically (recommended) or by
assigning an appropriate address
manually. The procedure is the same
as the one used for setting up the
Disklavier control unit for Internet
communications. Please follow the
instructions in Chapter 5 “Internet
Direct Connection (IDC) – Setting
the Disklavier Control Unit for the
Internet Connection” on page 41.
Note:
Use an STP (shielded twisted pair)
cable for connection. For details, see
Chapter 5 “Internet Direct
Connection (IDC) – Connecting the
Disklavier to the Internet” on
page 35.
Note:
For information about configuring a
personal computer for network
communications, please refer to the
documentation that came with the
computer.
Copying Song File from a Personal Computer to the Disklavier
Control Unit
1
Personal computer
Disklavier control unit
LAN
Router